Ford 7L1Z-2553-B Housing

You can Select Your Vehicle to check if 7L1Z-2553-B fits your vehicle.

Proceed to remove the caliper mounting bolts and the caliper itself. Clean the caliper using brake system cleaner (avoid kerosene or petroleum-based solvents). Carefully remove the dust boot(s) from the caliper and use compressed air applied through the hydraulic fluid inlet to force the piston(s) out of the bore(s), placing a wooden block between the caliper bridge and piston(s). Remove the piston seal(s) using a plastic or wooden tool and clean the piston(s) and cylinder bore(s) with brake system cleaner or clean brake fluid.

Inspect the piston and bore surfaces for defects, and replace them if necessary. Lubricate the new piston seal(s) with clean brake fluid, position them in the cylinder groove(s), and install new dust boot(s) onto the piston(s).