Ford F2TZ-7000-PRM Reman Automatic Transmission Kit

You can Select Your Vehicle to check if F2TZ-7000-PRM fits your vehicle.

To install the transmission, follow these steps:1. Push in and turn the converter to engage it with the front pump.2. Rotate the converter to align the bolt drive lugs and drain plug with the driveplate holes. Avoid a "nose-down" attitude to prevent disengagement of the converter from the pump gear.3. If the torque converter is bolted to the driveplate, position it with one bolt hole at the six o'clock position and install all bolts before tightening.4. Adjust the kickdown rod/cable, TV rod/cable, and manual selector linkage as needed.5. Lower the vehicle and add fluid to the Max mark on the dipstick with the engine off.6. Start the engine, check the fluid level, and top up if necessary.

Depending on the expense involved in having a faulty transmission overhauled, it may be advantageous to consider replacing the unit with either a new or rebuilt one.

The initial steps for removing the transmission are as follows:1. Disconnect the battery negative cable.2. Drain the transmission lubricant into a suitable container.

Some of the available automatic transmissions include the AOC 4-speed, C4, C5, C6 3-speed, E4OD 4-speed, and 4R7OW 4-speed.

While a competent do-it-yourselfer can remove and install a transmission if problems arise, it is recommended to leave the overhaul to a transmission repair shop.

The computer sends the appropriate commands to the internal solenoid body.