Ford F3TZ-7000-LRM Reman Automatic Transmission Kit

You can Select Your Vehicle to check if F3TZ-7000-LRM fits your vehicle.

It is recommended to seek assistance from a qualified dealership or shop.

To remove the transmission, follow these steps:1. Disconnect the cable from the negative battery terminal.2. Raise the vehicle on a hoist or with jack stands for better access.3. Drain the transmission fluid and temporarily install the pan.4. Remove the torque converter access cover and adapter plate bolts.5. Take off the driveplate-to-converter attaching nuts, making sure to mark their relationship to the driveplate.6. Rotate the engine to access the converter drain plug and remove it.7. On 2WD models, remove the driveshaft and cover the transmission end. On 4WD models, remove the transfer case.8. Detach the speedometer cable on pre-1992 2WD models.9. Remove the manual shift linkage, TV control rod or cable, kickdown rod or cable, and vacuum modulator hose if equipped.10. Disconnect the neutral safety switch electrical connector, manual lever position sensor electrical connector (E4OD only), and solenoid body electrical connector (E4OD only).11. Remove the transmission fluid filler tube and dipstick.

After the transmission is removed, you should check all clutch-related components and replace worn parts as required. Additionally, prepare the release bearing for reinstallation and install the clutch housing if removed.

Transmission gear selection and converter clutch operation in the Overdrive range is controlled by the Electronic Engine Control system.

The application of the transmissions depends on the year, engine, and model of the vehicle in which it is installed. If unsure, it's recommended to check with a local Ford dealer or automotive transmission facility.

Some suggestions for a successful transmission overhaul include obtaining exploded-view drawings of the particular transmission, creating diagrams or taking photos during disassembly, laying out each part in order, checking for missed bolts or snap rings before applying force, and anticipating which parts may need replacement and having them available beforehand.