Ford BL8Z-7821813-A Latch

You can Select Your Vehicle to check if BL8Z-7821813-A fits your vehicle.

Once every 3,000 miles or every three months.

1. Remove the electrical connector from the rear door latch. 2. Remove the door glass top run bolts and separate the door glass top run from the door. 3. Remove the door handle screws from inside the door panel. 4. Remove the cover from the outside of the door. 5. Carefully slide the door handle toward the rear of the vehicle. 6. Inside the door panel, remove the screw and loosen the remote control assembly. 7. Disconnect the door handle actuating rod. 8. Remove the door latch screws and remove the rear door latch. 9. Release the cable conduit and disconnect the interior door handle cable. 10. Remove the rear door handle assembly by prying the door handle clips and separating the door handle from the door. 11. Installation follows the reverse order of removal.

A few drops of light oil or lock lubricant.

1. Raise the window. 2. Remove the door trim panel and watershield. 3. Inside the door, remove the door latch assembly screw and the door handle cover from the exterior of the door. 4. Carefully slide the door handle toward the rear of the vehicle. 5. Remove the rubber insulators and release the clip to position the interior door handle aside. 6. Remove the door latch screws and disconnect the door latch electrical connector. 7. Slide the door latch remote control assembly toward the front of the vehicle. 8. Remove the anti-theft guard and disconnect the exterior door handle actuating rod. 9. The installation process is the reverse of removal.