Make sure this part fits

Ford F4TZ-1177-B Seal

1994-1997 Ford F4TZ1177B

Customer Questions & Expert Answers (6)
Ford F4TZ-1177-B Seal
  • Part Description
    SEAL
  • Replaced By
    F4TZ-1S177-BA
  • Manufacturer
    Ford
Make sure this part fits
$71.50 MSRP: $118.18
You Save: $46.68 (40%)
Ships in 1 Business Day
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Ford
    Manufacturer Part NumberF4TZ-1177-B, F4TZ1177B
    Part DescriptionSEAL
    Item Dimensions6.4 x 1.2 x 6.1 inches
    Item Weight0.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUF4TZ-1177-B
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1994-1997 Ford F-1506 Cyl 3.8L, 6 Cyl 4.2L, 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L3AT C6, 4AT 4R70W, 4AT 4R75W, 4AT E4OD, 4MT, 5MT
    1994-1996 Ford F-2506 Cyl 4.9L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L3AT C6, 4AT E4OD, 4MT, 5MT
    1994-1997 Ford F-3506 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L3AT C6, 4AT E4OD, 5MT
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F4TZ-1177-B fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How to replace semi-floating ball bearing type rear Wheel Bearing and Wheel Seal on Ford F-250? Posted by Customer
    A:
    Remove the axleshaft. Use a special slide hammer type puller to take out the axleshaft seal; if only seal replacement is needed, proceed to the next step. If both the bearing and seal need removal, they can be taken out simultaneously using a slide hammer in conjunction with a bearing removal tool. Pivot the jaws of the tool sideways and insert them behind the bearing, allowing the jaws to engage the bearing for removal. Inspect the inner surface of the housing for any issues that could hinder the new seal or bearing from fitting properly, addressing any problems such as burrs, galling, or rust before installing the new components. If replaced, lubricate the new bearing with rear axle lube and install it squarely into the axle housing bore, using a bearing/seal driver to tap it in until it bottoms out, ensuring it is pressed in squarely. Before installing the seal, apply a small amount of RTV sealant on the outer edge (avoiding the sealing lip) and coat the inner sealing lip with multi-purpose grease. Use an appropriate seal driver to tap the new seal into its bore, ensuring even pressure around its circumference until it is fully seated. Finally, install the axleshaft(s).
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in the disassembly process for the 1984 Ford F-250? Posted by Customer
    A:
    Raise the front of the vehicle and place it securely on jackstands.
    Posted by FordPartsGiant Specialist
    Q:
    What is required to replace the axleshaft seals in a monobeam front axle for the 1983 Ford F-250? Posted by Customer
    A:
    Removal of the differential/ring gear assembly is required.
    Posted by FordPartsGiant Specialist
    Q:
    What should be noted when installing the hub nut on the 1990 Ford F-250? Posted by Customer
    A:
    Ensure the tab is located in the keyway with the identification markings facing out.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done when it is determined that the wheel bearing is to be replaced for the 1983 Ford F-250? Posted by Customer
    A:
    The bearing cup, which normally remains in the axle housing when the axleshaft is removed, must also be replaced. Use a slide hammer-type puller to remove it from the housing.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F4TZ-1177-B, the Right Choice

To ensure reliability, purchase Ford part # F4TZ-1177-B Seal. It is sometimes referred to as Ford Wheel Seal. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Ford F-150, F-250, F-350 models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F4TZ1177B Seal. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Ford parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly