Ford 6S4Z-9H307-A Sender And Pump Assembly

You can Select Your Vehicle to check if 6S4Z-9H307-A fits your vehicle.

For 2.0L Zetec-E engines, follow similar steps but also pinch off the fuel return line and check for restrictions. Reconnect the vacuum hose to the pressure regulator and verify that the pressure decreases.

Start by disconnecting the fuel line(s) by releasing their lugs using a small screwdriver. Make sure to recover both O-rings from each line as they are disconnected. Unscrew and remove the special retaining ring that holds the pump/sender unit in place. The manufacturer's service tool or large slip-joint pliers can be used for this task. After removing the retaining ring, the pump/sender top cover can be withdrawn, and the wiring should be fed out through the opening.