Ford F4TZ-5310-G Spring - Front

You can Select Your Vehicle to check if F4TZ-5310-G fits your vehicle.

Loosen the front wheel lug nuts, raise the vehicle, and support it on jackstands. Remove the wheels and support the axle with a floor jack. Detach the stabilizer bar and disconnect the shock absorber(s). Remove the bolt holding the upper spring retainer and lower the axle to expose the spring. Unfasten the lower spring retaining nut and remove the spring. To install, position the spring on the lower seat and install the lower spring retainer washer and nut. Raise the spring/axle until the spring top fits the upper spring cup. Install the upper spring retainer and bolt. Reconnect the shock absorber(s) and reattach the stabilizer bar. Reinstall the brake caliper if removed, install the wheels, lower the vehicle, and tighten the lug nuts.

Support the bottom of the axle being worked on with a floor jack to prevent hanging by the brake hose.

Raise the vehicle and install jack stands under the frame. Position a jack beneath the spring under the axle. Raise the jack and compress the spring.

Tighten the lug nuts to the proper torque.