Ford 5R3Z-5560-C Spring - Rear

You can Select Your Vehicle to check if 5R3Z-5560-C fits your vehicle.

To reassemble the strut assembly, the rubber bumper and dust cover should be installed. The coil spring should be placed onto the strut, ensuring correct positioning onto the lower spring seat. The upper bearing assembly should be installed, aligning the notch on the bearing assembly with the clevis on the bottom of the strut. The damper rod nut should be installed and tightened to the specified torque. Finally, the spring compressor tool can be removed, and the strut/spring assembly can be installed.

The initial steps before removing the rear coil springs are:Mark the shock absorbers in relation to the dust sleeve while the vehicle is on the ground and at normal ride height.Loosen the wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands placed under the frame.Remove the wheels.