Ford BR3Z-5560-B Spring - Rear

You can Select Your Vehicle to check if BR3Z-5560-B fits your vehicle.

To reassemble the strut assembly, the rubber bumper and dust cover should be installed. The coil spring should be placed onto the strut, ensuring correct positioning onto the lower spring seat. The upper bearing assembly should be installed, aligning the notch on the bearing assembly with the clevis on the bottom of the strut. The damper rod nut should be installed and tightened to the specified torque. Finally, the spring compressor tool can be removed, and the strut/spring assembly can be installed.

The procedure for reinstalling the coil springs is as follows:Reinstall the insulators, ensuring proper positioning between the frame and axle tube seats.Raise the axle enough to install the shock absorber's lower mounting fasteners, but don't tighten them yet.Carefully raise the axle to align the marks on the shocks with the dust sleeves.Tighten the shock's lower mounting fasteners to the torque specified in the specifications.