Ford F2GZ-5560-C Spring - Rear

You can Select Your Vehicle to check if F2GZ-5560-C fits your vehicle.

1. Guide the assembly up into the fenderwell. 2. Align the previously made match marks. 3. Insert the upper mounting studs through the holes in the body. 4. Once the studs protrude, install the new nuts to prevent the shock from falling back through, but don't tighten them yet. 5. Use the jack to position the steering knuckle. 6. Install the two lower mounting bolts and nuts. 7. Tighten the nuts to the specified torque. 8. Install the wheel and lug nuts. 9. Lower the vehicle and tighten the lug nuts to the specified torque. 10. Finally, tighten the upper mounting nuts to the specified torque.

During the installation process, it should be ensured that the lower seat is correctly positioned, the spring is placed with the lower end no more than 0.39 inches away from the step in the lower spring seat, and the jack is raised to secure the components. In all-wheel drive models, the drive axle should be placed back into the hub, seated properly, and the nuts should be tightened to the specified torque.

Utilize coil spring compressor tools to fully engage and compress the spring until tension is relieved from the upper mount.