Ford F4TZ-5560-G Spring - Rear

You can Select Your Vehicle to check if F4TZ-5560-G fits your vehicle.

Install the front spring plate spacer and install the axle U-bolts through the holes in the U-bolt spacer, finger tightening the U-bolt nuts.

To install the spring, position the rear of the spring in the shackle and install the upper shackle-to-spring bolt and nut. On 4WD models, install ride height spacers between the spring and axle. Position the front of the spring in the bracket and install the bolt and nut. Position the shackle in the rear bracket and install the bolt and nut. Place the spring on top of the axle with the spring lie bolt centered in the hole in the seat. If applicable, install the auxiliary spring and spacer. Install the spring U-bolts, U-bolt plate, and nuts. Lower the vehicle to the ground and tighten the U-bolt nuts, front spring nut and bolt, and rear shackle bolts and nuts to the specified torque.