Lincoln F6AZ-2005-A Booster Assembly - Brake

You can Select Your Vehicle to check if F6AZ-2005-A fits your vehicle.

To remove the power brake booster unit, detach the master cylinder from the booster, disconnect the manifold vacuum hose, unplug the electrical connector from the brake light switch, and remove the pushrod retaining clip and nylon washer from the brake pedal pin. Remove the nuts attaching the booster to the firewall, detach the booster from the firewall, and lift it out of the engine compartment.

Vacuum-operated boosters require periodic inspection of the vacuum hose and case for maintenance. Dismantling and repair should be done by a professional.

To install the power brake booster unit, place the booster on the firewall, tighten the mounting nuts, reconnect the pushrod and brake light switch to the brake pedal, install the retaining clip, and attach the master cylinder to the booster, tightening the nuts. Adjustment may be necessary for some boosters with adjustable pushrods.