Lincoln XL1Z-9A758-EA Throttle Control Cable Assembly

You can Select Your Vehicle to check if XL1Z-9A758-EA fits your vehicle.

To install, reverse the removal steps, ensuring the cable is routed correctly and the grommet seats completely in the firewall. If necessary, apply sealant around the accelerator cable at the engine compartment side of the firewall to prevent water from entering the passenger compartment.

Start by removing the accelerator control protection shield. Then, detach the cruise control cable end from the throttle lever and the accelerator cable from the throttle lever. Separate the accelerator cable from the cable bracket and pull the cable end out from the accelerator pedal recess in the driver's compartment. Disconnect any cable clips or brackets securing the accelerator cable and remove the cable through the firewall from the engine compartment.