Lincoln 7L1Z-2B121-C Brake Caliper Assembly-Less Pads

You can Select Your Vehicle to check if 7L1Z-2B121-C fits your vehicle.

Lubricate the caliper bore(s) and piston(s) with clean brake fluid, then insert the piston(s) into the bore(s). Ensure the piston(s) are aligned correctly, depress them partially into the bore with a C-clamp and a wooden block. Seat the boot properly and push the piston(s) fully into the bore. Install the large anti-rattle clip if it was removed and ensure it's properly seated.

Before starting the procedure, ensure that rebuild kits are accessible. Always replace or rebuild calipers in pairs. If the vehicle is equipped with an air suspension system, turn it off. Loosen the wheel lug nuts, raise and securely support the vehicle on jackstands, and engage the parking brake before removing the wheels.