Make sure this part fits

Lincoln 9L3Z-16612-A Hood Assembly

2010-2014 Lincoln Mark LT 9L3Z16612A

Customer Questions & Expert Answers (2)
Ford 9L3Z-16612-A Hood Assembly
  • Part Description
    Hood Assy
  • Base No.
    16612
  • Manufacturer
    Ford
Make sure this part fits
$683.66 MSRP: $1266.05
You Save: $582.39 (46%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.16612
    Manufacturer Part Number9L3Z-16612-A, 9L3Z16612A
    Part DescriptionHood Assy
    Other NamesHood
    Item Dimensions9.2 x 69.8 x 53.0 inches
    Item Weight41.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU9L3Z-16612-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2014 Lincoln Mark LT6 Cyl 3.5L DOHC TIVCT, 6 Cyl 3.7L PFI NA, 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.0L MOD DOHC SEFI NA, 8 Cyl 5.4L, 8 Cyl 6.2L OHC NA4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    I would like to know is this part gonna fit with my car Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 9L3Z-16612-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How should the hood be removed and installed, and what adjustments are necessary for proper alignment on Ford F-150? Posted by Customer
    A:
    The hood is rather massive and requires certain skills to put on and take off; it is better to rope in at least two people for the process. Start by weighting up the cowl region or the body together with fenders by means of applying blankets or pads in order to prevent scratching of the paint surface when the hood is being removed. But if it has cords or wires connected, remove them in order not to hinder the process. Place marks or draw a line around the hood hinge so that it will act as your guide when you replace the hinge of the hood. First hand, an assistant should be supporting one part of the hood while you support the other, and with your shoulder use the leverage to remove the bolts holding the hinge to the hood. After the hood is removed, installation is done in a manner that is reverse to the removal process. For adjustment, the fore-and-aft and the side-to-side condition can be attained after loosening the bolts and nuts of the hinge plate slot. Write a pencil line around the hinge plate to monitor the movement and then remove the bolts or nuts and move the hood slowly while tightening the hinge bolts before exercising the position again. If fine tuning is required, the whole hood latch assembly can be slid up and down as well as forward and backward on the radiator support to get the desired hood closing position against the fenders. Tape around the above mounting bolts to identify them, loosen them and offer any required adjustability before tightening. Last, the hood bumpers of the radiator support need to be aligned to get the hood perfectly aligned to the fenders when closed and also to have the support of the under grilles from the lower bumpers. Apply white lithium-base grease to the hood latch assembly and hinges from time to time to reduce wear and the tendency for them to bind.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 9L3Z-16612-A, the Right Choice

To ensure reliability, purchase Ford part # 9L3Z-16612-A Hood Assembly. It is sometimes referred to as Lincoln Hood. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Mark LT models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 9L3Z16612A Hood Assembly. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly