Lincoln 7L1Z-2552-B Housing

You can Select Your Vehicle to check if 7L1Z-2552-B fits your vehicle.

Inspect the piston and bore surfaces for defects, and replace them if necessary. Lubricate the new piston seal(s) with clean brake fluid, position them in the cylinder groove(s), and install new dust boot(s) onto the piston(s).

Lubricate the caliper bore(s) and piston(s) with clean brake fluid, then insert the piston(s) into the bore(s). Ensure the piston(s) are aligned correctly, depress them partially into the bore with a C-clamp and a wooden block. Seat the boot properly and push the piston(s) fully into the bore. Install the large anti-rattle clip if it was removed and ensure it's properly seated.