Make sure this part fits

Lincoln DS7Z-6600-A Pump Assembly - Oil

2013-2019 Lincoln MKZ DS7Z6600A

Customer Questions & Expert Answers (13)
Ford DS7Z-6600-A Pump Assembly - Oil
  • Part Description
    Pump Assy - Oil
  • Base No.
    6600
  • Replaced By
    DS7Z-6600-B
  • Manufacturer
    Ford
Make sure this part fits
$82.54 MSRP: $120.67
You Save: $38.13 (32%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.6600
    Manufacturer Part NumberDS7Z-6600-A, DS7Z6600A
    Part DescriptionPump Assy - Oil
    Item Dimensions6.3 x 4.6 x 4.5 inches
    Item Weight2.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUDS7Z-6600-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2013-2019 Lincoln MKZ4 Cyl 2.0L Duratec Hybrid (130kW) 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F50, 6-Speed Automatic Transmission 6F55, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    I am wondering if this is the exact part that fits in Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if DS7Z-6600-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What steps are required for the 2017 Ford Fusion? Posted by Customer
    A:
    1. Remove the timing chain cover. 2. Remove the oil pan.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    How do you remove the oil pick-up tube for the 1995 Ford Ranger? Posted by Customer
    A:
    Remove the oil pick-up mounting bolts and then remove the pick-up tube. The oil pump pick-up tube is held by two mounting bolts.
    Posted by FordPartsGiant Specialist
    Q:
    How should the oil pump mounting bolts be loosened on the 2017 Ford Fusion? Posted by Customer
    A:
    Loosen each of the four oil pump mounting bolts one turn (three bolts on 3.5L engines), then gradually and evenly loosen each bolt in several steps. When all bolts are loose, remove the bolts and oil pump. On 3.5L engines, rotate the oil pump housing clockwise to separate it from the oil pickup tube.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the oil pump on the block for the 2009 Ford Ranger? Posted by Customer
    A:
    Install the oil pump on the block. Install the oil pump bolts and tighten them to the torque.
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in the removal process after the engine is removed for the 2002 Ford Ranger? Posted by Customer
    A:
    The first step is to remove the timing chain.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after installing the oil pump for the 2009 Ford Ranger? Posted by Customer
    A:
    The remainder of the installation is the reverse of the removal process.
    Posted by FordPartsGiant Specialist
    Q:
    What is the next step after installing the oil pump and tightening the bolts for the 1995 Ford Ranger? Posted by Customer
    A:
    The next step is to complete the remainder of the installation, which is the reverse of the removal process.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after priming the oil pump for the 1995 Ford Ranger? Posted by Customer
    A:
    Install the oil pump in the cylinder block, being careful not to spill the primer oil. Then, install the oil pump mounting bolts and tighten them to the specified torque.
    Posted by FordPartsGiant Specialist
    Q:
    When is it recommended to replace the oil pump for the 1998 Ford Ranger? Posted by Customer
    A:
    We recommend oil pump replacement any time the engine is rebuilt and when the pump has high mileage or is otherwise suspect.
    Posted by FordPartsGiant Specialist
    Q:
    What is the first step in removing the oil pump for the 2010 Ford Ranger? Posted by Customer
    A:
    The first step is to remove the oil pan.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Oil Pump
    Q:
    What should be done after inserting the intermediate drive shaft for the 2002 Ford Ranger? Posted by Customer
    A:
    Install the oil pump on the block, using a new gasket. Make sure the pump engages the driveshaft. Install the oil pump bolts and tighten to the torque.
    Posted by FordPartsGiant Specialist
    Q:
    What is the final step in the process for the 2003 Ford Ranger? Posted by Customer
    A:
    Install the timing belt and outer cover.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part DS7Z-6600-A, the Right Choice

To ensure reliability, purchase Ford part # DS7Z-6600-A Pump Assembly - Oil. It is sometimes referred to as Lincoln Oil Pump. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln MKZ models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford DS7Z6600A Pump Assembly - Oil. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly