Lincoln 7T4Z-8005-B Radiator Assembly

You can Select Your Vehicle to check if 7T4Z-8005-B fits your vehicle.

Before removing a 2015 or later model's cooling module, have the air conditioning system discharged by a licensed technician. Begin by draining the cooling system, then remove the front bumper cover, active shutter grille, air cleaner housing and duct. Disconnect the upper radiator hose, cooling fans' electrical connector, and transaxle cooler lines. For 3.5L engines, disconnect the transaxle cooler quick-disconnect lines. For turbocharged models, remove the CAC inlet and outlet pipes. Disconnect the coolant expansion tank line and lower radiator hose. Remove the cooling module mounting bolts and the module itself. To install, reverse these steps, ensuring all components are secure. Refill the system with antifreeze, check the transaxle fluid levels, and check for leaks. Have the air conditioning system recharged by the original shop.

You should also inspect the rubber insulators in the lower radiator support for cracks and deterioration, ensuring they are free of dirt and gravel. When reinstalling the radiator, make sure it's correctly seated on these insulators.

Start by draining the cooling system and then proceed to remove the front bumper cover and active shutter grille, as well as the air cleaner housing and duct.