Make sure this part fits

Lincoln F7ZZ-6565-AA Rod - Valve Push

1989-2008 Lincoln F7ZZ6565AA

Customer Questions & Expert Answers (4)
Ford F7ZZ-6565-AA Rod - Valve Push
  • Part Description
    Rod - Valve Push
  • Base No.
    6565
  • Replaces
    E9SZ-6565-A
  • Manufacturer
    Ford
Make sure this part fits
$5.46 MSRP: $8.49
You Save: $3.03 (36%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Lincoln
    Base No.6565
    Manufacturer Part NumberF7ZZ-6565-AA, F7ZZ6565AA
    Part DescriptionRod - Valve Push
    Other NamesPush Rod
    ConditionNew
    Fitment TypeDirect Replacement
    ReplacesE9SZ-6565-A
    ManufacturerFord
    SKUF7ZZ-6565-AA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1989-1994 Lincoln Continental6 Cyl 3.8L4AT AX4S, 4AT AXOD, 4AT AXOD-E
    2006-2008 Lincoln Mark LT6 Cyl 4.2L OHV EFI4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R70E W/TSS, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 5-Speed Manual Transmission - Mazda M5R2-C, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if F7ZZ-6565-AA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do you remove and install rocker arms and pushrods in 4.2L V6 engine on Ford F-150? Posted by Customer
    A:
    Remove the valve cover(s) from the cylinder head(s). Beginning at the front of one cylinder head, remove the rocker arm fulcrum bolts, which may not need to be completely removed in all cases; loosen them several turns and check if the rocker arms can be pivoted out of the way to allow pushrod removal. Store the bolts separately in marked containers to ensure they will be reinstalled in their original locations. If only the pushrods are being removed, loosen each bolt just enough to allow the rocker arms to be rotated to the side for pushrod extraction. Lift off the rocker arms and fulcrums, storing them in marked containers with the bolts for proper reinstallation. Remove the pushrods and store them separately to avoid mixing during installation, using a perforated cardboard box for organization and noting the label indicating the front of the engine. Check each rocker arm for wear, cracks, and other damage, especially where the pushrods and valve stems contact the rocker arm faces, ensuring the hole at the pushrod end of each rocker arm is open. Inspect the rocker arm pivot area and fulcrum for wear, cracks, and galling; if any rocker arms are worn or damaged, replace them along with the fulcrums. Inspect the pushrods for cracks and excessive wear at the ends, rolling each pushrod across a piece of plate glass to check for bending. Lubricate the lower end of each pushrod with clean engine oil or moly-base grease and install them in their original locations, ensuring each pushrod seats completely in the lifter. Apply moly-base grease to the ends of the valve stems and the upper ends of the pushrods before positioning the rocker arms and fulcrums, also applying moly-base grease to the fulcrums to prevent damage to the mating surfaces before engine oil pressure builds up. Set the rocker arms and guides in place, then install the fulcrums and bolts, tightening the rocker arm bolts to the specifications. Finally, install the valve covers, completing the installation in reverse order of removal.
    Posted by FordPartsGiant Specialist
    Q:
    What tool is required to bleed down the lifters when checking the valve stem-to-rocker arm clearance for the 1989 Ford Thunderbird? Posted by Customer
    A:
    Using Ford lifter bleed-down tool T70P-6513-A or equivalent, press on each rocker arm until the lifter leaks down completely. Check the clearance between the valve stem and rocker arm with a feeler gauge. Compare it to the specifications in this chapter and write it down. Repeat this procedure for each valve listed above.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Pushrod
    Q:
    How can the clearance be changed if it is not within specification for the 1990 Mercury Cougar? Posted by Customer
    A:
    The clearance can be changed by using different length pushrods, available from your dealer. If there isn't enough clearance, use a shorter pushrod; if there is too much clearance, use a longer one. If the clearances are within specification, install the rocker arm covers.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Pushrod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part F7ZZ-6565-AA, the Right Choice

To ensure reliability, purchase Ford part # F7ZZ-6565-AA Rod - Valve Push. It is sometimes referred to as Lincoln Pushrod. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Lincoln Continental, Mark LT models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford F7ZZ6565AA Rod - Valve Push. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Lincoln parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly