Lincoln BL3Z-4R602-J Drive Shaft Assembly

You can Select Your Vehicle to check if BL3Z-4R602-J fits your vehicle.

To remove the front driveshaft on models with CV joints, you should remove the driveshaft shield, mark the relationship of the driveshaft to the differential mating flange, and then proceed to remove the bolts securing the front end of the driveshaft to the differential mating flange and the driveshaft universal joint to the transfer case.

It is important to inspect and maintain the driveshaft assembly to ensure its proper function and prevent issues like noise or vibration while driving. The driveshaft should be kept clean and free from undercoating, mud, or debris. Additionally, it's essential to check that the small weights used to balance the driveshaft are securely attached. When removing and reinstalling the driveshaft, it must be reinstalled in the same relative position to preserve its balance.