Lincoln F8VZ-18124-BA Shock Absorber Assembly

You can Select Your Vehicle to check if F8VZ-18124-BA fits your vehicle.

The shock absorber should be removed through the hole in the lower control arm.

Locate the upper retaining nut for the shock absorber on top of the frame and remove the nut, washer, and insulator. Compress the shock absorber to clear the hole in the frame and remove the inner insulator and washer. On certain models, open the trunk, remove the side trim panel, and remove the upper mounting nut from the shock absorber rod. Remove the lower retaining nut or bolt and remove the shock absorber from the vehicle.

The floor jack can be removed from under the control arm.

Raise the vehicle and inspect the shock absorbers for fluid leakage, ensuring that any fluid noted is from the shocks and not from another source.