Lincoln 6E5Z-18124-BR Shock Absorber Assembly

You can Select Your Vehicle to check if 6E5Z-18124-BR fits your vehicle.

Clean the boots with soap and water to prevent premature deterioration caused by oil and grease.

If the front suspension shock absorber/coil springs exhibit signs of wear (such as leaking fluid, loss of damping capability, sagging, or cracked coil springs), they should be disassembled and overhauled as necessary. The shock absorbers themselves cannot be serviced and should be replaced if faulty; the springs and related components can be replaced individually. To maintain balanced characteristics on both sides of the vehicle, the components on both sides should be replaced at the same time.

Maneuver the shock out of the vehicle. If new shocks are to be installed, swap the bracket to the top of the new shock.

Unbolt the brake hose bracket from the shock absorber. Remove the ABS speed sensor and detach the wiring harness by removing the clamp bracket bolt. If equipped, remove the front height sensor arm bracket retaining bolt and set the height sensor out of the way.