Lincoln 5L1Z-8620-BA V-Belt

You can Select Your Vehicle to check if 5L1Z-8620-BA fits your vehicle.

To replace the drivebelt, rotate the tensioner to relieve the tension on the belt. Some models have a square hole in the tensioner arm that will accept a 1/2-inch drive breaker bar. On other models, place a wrench on the tensioner pulley bolt. Remove the belt from the auxiliary components and carefully release the tensioner. Route the new belt over the various pulleys, again rotating the tensioner to allow the belt to be installed, then release the belt tensioner. Make sure the belt fits properly into the pulley grooves - it must be completely engaged. Most models have a drivebelt routing decal on the upper radiator panel to help during drivebelt installation.

The belt tension is automatically adjusted by the belt tensioner and does not require any adjustments.