Lincoln BT4Z-8620-F V-Belt

You can Select Your Vehicle to check if BT4Z-8620-F fits your vehicle.

To inspect the accessory drivebelt, follow these steps: Raise the front of the vehicle and secure it on jackstands. Remove the right-hand wheel and splash shield in the right fender well. Inspect the entire belt length for cracks, separation, fraying, or glazing. Assess the pulleys for damage. Replacement may not be necessary until the belt has traveled over 100,000 miles. Small cracks in ribbed belts may be acceptable unless they are extensive or deep.

The procedure for replacing the accessory drivebelt on V6 models depends on the engine type: For 2.7L engines, loosen lug nuts, raise the vehicle, remove the lower splash shield, release tension, and replace the belt. For 3.5L and 3.7L V6 engines, remove the wheel, splash shield, and tensioner to replace the belt.