Mercury E9SZ-6211-A Bearing - Connecting Rod

You can Select Your Vehicle to check if E9SZ-6211-A fits your vehicle.

The bearing material is wiped or extruded from the steel backing of the bearing. Temperatures may increase to the point where the steel backing turns blue from overheating.

Full throttle, low-speed operation (lugging the engine) puts very high loads on bearings, which tends to squeeze out the oil film. These loads cause the bearings to flex, producing fine cracks in the bearing face (fatigue failure). Eventually, the bearing material will loosen in pieces and tear away from the steel backing. Short trip driving leads to corrosion of bearings because insufficient engine heat is produced to drive off the condensed water and corrosive gases. These products collect in the engine oil, forming acid and sludge, which attacks and corrodes the bearing material.

Foreign particles, including metal chips and abrasives, can embed in the bearing material and cause damage.

Driving habits can have a definite effect on bearing life. Full throttle, low speed operation (lugging the engine) puts very high loads on bearings, which tends to squeeze out the oil film. These loads cause the bearings to flex, producing fine cracks in the bearing face (fatigue failure). Short trip driving leads to corrosion of bearings because insufficient engine heat is produced to drive off the condensed water and corrosive gases, which form acid and sludge that attack and corrode the bearing material.