Mercury E9SZ-13466-B Bulb

You can Select Your Vehicle to check if E9SZ-13466-B fits your vehicle.

Reach behind the headlight assembly and unplug the electrical connector, using a screwdriver to hold the clip out of the way.

Insert the new bulb into the holder and rotate it clockwise to seat it in the holder.

Disconnect the electrical connector from the back of the headlight (Unplug the electrical connector from the headlight).

1. The fog lights are located in the lower part of the bumper cover. Use a creeper or an old blanket to lie on, and take a flashlight with you. 2. To remove the fog light bulb socket from the fog light housing, turn it counterclockwise and pull it out. 3. Disconnect the electrical connector from the fog light bulb. 4. Reconnect the electrical connector to the new fog light bulb. 5. To install the fog light socket in the fog light housing, insert it into its mounting hole and turn it clockwise until it stops.

Rotate the headlight bulb retaining ring counterclockwise and pull out the bulb socket. To remove the headlight bulb from the headlight housing, turn it counterclockwise and pull it out. On 2011 and later models, remove the headlight bulb by twisting it a small amount counterclockwise. Remove the park/turn bulb and the side marker light in the same manner.