Make sure this part fits

Mercury 7T4Z-6250-A Camshaft

2007-2011 Mercury 7T4Z6250A

Customer Questions & Expert Answers (9)
Ford 7T4Z-6250-A Camshaft
  • Part Description
    Camshaft
  • Base No.
    6250
  • Position
    Passenger Side
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.6250
    Manufacturer Part Number7T4Z-6250-A, 7T4Z6250A
    Part DescriptionCamshaft
    Item Dimensions24.2 x 4.2 x 4.2 inches
    Item Weight4.70 Pounds
    PositionPassenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU7T4Z-6250-A
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2007-2011 Mercury Milan6 Cyl 3.5L DOHC VCT SMPI5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
    2008-2009 Mercury Sable6 Cyl 3.5L DOHC VCT SMPI6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F50, CVT Select Shift Transmission, Four-Wheel Drive (Part Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
  • Customer Questions & Expert Answers

    Q:
    Does the PN fit my vehicle? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7T4Z-6250-A fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    How do you prevent the camshaft from turning when loosening the phaser or sprocket bolts for the 2019 Ford Fusion? Posted by Customer
    A:
    Place a wrench on the hexagonal area of the camshaft.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What are the final steps for the 2014 Ford Taurus? Posted by Customer
    A:
    70. Install the VCT units. 71. Rotate the crankshaft clockwise to position the keyway in the 11 o'clock position. 72. Install the primary timing chain. 73. Reinstall the valve train oil tubes and tighten the bearing cap bolts to the torque Specifications. 74. The remainder of installation is the reverse of removal. 75. Before starting and running the engine, refill the cooling system, change the oil, and install a new oil filter.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft caps be handled during removal for the 2011 Ford Fusion? Posted by Customer
    A:
    Note the location of each camshaft cap, use a marker on each cap or notes on paper or cardboard if they're not marked, and work in the order opposite that of the tightening sequence to remove the camshaft bearing cap bolts.
    Posted by FordPartsGiant Specialist
    Q:
    What is the next step after tightening the camshaft bearing cap bolts to Step 1 torque for the 2013 Ford Taurus? Posted by Customer
    A:
    Using the same sequence, tighten the bearing cap bolts to the Step 2 torque specifications.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after installing the primary timing chain for the 2018 Lincoln MKX? Posted by Customer
    A:
    Reinstall the valve train oil tubes and tighten the bearing cap bolts to the specified torque.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after installing the variable camshaft timing (VCT) solenoids for the 2008 Lincoln MKX? Posted by Customer
    A:
    Tighten the fasteners to the specified torque.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the sixth step in the removal process for the 2012 Ford Edge? Posted by Customer
    A:
    Withdraw the caps, noting their markings and the presence of the locating dowels, then remove the camshafts.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after installing the primary timing chain for the 2015 Ford Edge? Posted by Customer
    A:
    Reinstall the valve train oil tubes and tighten the bearing cap bolts to the specified torque.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part 7T4Z-6250-A, the Right Choice

To ensure reliability, purchase Ford part # 7T4Z-6250-A Camshaft. It is sometimes referred to as Mercury Camshaft. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Milan, Sable models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford 7T4Z6250A Camshaft. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly