Mercury 4W7Z-16005-AA Fender Assembly - Front

You can Select Your Vehicle to check if 4W7Z-16005-AA fits your vehicle.

Before we begin any operation, park the vehicle, engage the handbrake and then roll the car backwards to apply some reverse angle before jacking up the vehicle from the front using jackstands and then removes the front wheel. Then, remove the splash shield from the fender and the body and then carry out the following measures. Remove the bolts in the antenna and other connecting parts such as the wiring harness for bulb connectors and any other which will hinder the removal of the fenders. Go ahead to take out the fender mounting bolts and nut, then unbolt the fender, and as you take it off make sure there is someone helping you to balance it and move it off the vehicle to prevent scratching the rest of the body. When installing the same should be done in the order that is the reverse of the removal process to which all nuts bolts and screws were tightened.

Before we begin any operation, park the vehicle, engage the handbrake and then roll the car backwards to apply some reverse angle before jacking up the vehicle from the front using jackstands and then removes the front wheel. Then, remove the splash shield from the fender and the body and then carry out the following measures. Remove the bolts in the antenna and other connecting parts such as the wiring harness for bulb connectors and any other which will hinder the removal of the fenders. Go ahead to take out the fender mounting bolts and nut, then unbolt the fender, and as you take it off make sure there is someone helping you to balance it and move it off the vehicle to prevent scratching the rest of the body. When installing the same should be done in the order that is the reverse of the removal process to which all nuts bolts and screws were tightened.