Mercury 5M6Z-6A664-AA Pcv Vent Hose

You can Select Your Vehicle to check if 5M6Z-6A664-AA fits your vehicle.

Thoroughly clean the fresh air inlet hose and inspect it for cracks, tears, or deterioration. Replace it if damaged, and also check the grommet at the air intake duct.

Remove the catalytic converter and exhaust manifold, disconnect the PCV hose, remove the mounting bolts, and detach the separator from the engine block.

Vacuum hoses are often color-coded and require specific characteristics. When checking vacuum hoses, use hoses made of the same material when replacing them. If necessary, remove the vacuum hoses from the vehicle for a thorough inspection, and label them for proper reinstallation. Inspect plastic T-fittings for cracks and check the hose where it fits over each fitting for distortion. You can use a small piece of 1/4-inch inside diameter vacuum hose as a stethoscope to detect vacuum leaks by listening for hissing sounds.

Inspecting the PCV (Positive Crankcase Ventilation) system hose is important to reduce hydrocarbon emissions. During the inspection, check for cracks, leaks, or damage in the PCV hose. Additionally, ensure that there are no obstructions inside the hose and clean it with solvent if it's clogged.