Mercury F77Z-9E926-AD Housing - Throttle Plate

You can Select Your Vehicle to check if F77Z-9E926-AD fits your vehicle.

Take out the mounting bolts and discard the gasket as you remove the throttle body. Clean the gasket mating surfaces and use a new gasket when installing, tightening the bolts securely. To detach the upper intake manifold, disconnect the battery and then remove the air cleaner outlet tube, accelerator cable splash shield bracket, and cable from the throttle body. Remove the manifold mounting bolts lift it off of the fuel rail and discard the gasket. Installation involves cleaning and inspection of mounting faces, placing a new gasket onto lower intake mounting face, and securing manifold and throttle body assembly to lower intake manifold.

Disconnect the battery, detach the air cleaner outlet tube, and remove the accelerator cable splash shield, bracket, and cable from the throttle body. Disconnect all remaining hoses and electrical connectors. Additional steps may be required for specific engine models, such as disconnecting the Idle Air Control (IAC) valve electrical connector, vacuum lines, PCV valve, spark plug wires, and other components. Remove the upper intake manifold mounting bolts, lift the manifold off the fuel rail, and discard the gasket.