Mercury 6E5Z-5421813-BA Latch

You can Select Your Vehicle to check if 6E5Z-5421813-BA fits your vehicle.

To replace the outside door handle lever on 2012 and earlier models firstly, remove the trim cap to the outside handle retaining screw; on the 2006 to 2009 models, take out the screw but for the 2010 model, this screw must only be loosened. After that, remove the cover of the outside handle and pull the handle down and backward to free it from the handle reinforcement provided on the inside of the door. Check the outside door handle gaskets and, if they are cracked or perished, fit new ones and reverse the process. For the models produced after 2013, there will be a cap over the door handle screw; pull this trim cap to release the door handle screw; hold the door handle as if opening the door; rotate the release screw eight full turns before pulling up the rear part of the door handle assembly. If equipped with push button starting, remove the electrical connection from the door handle assembly and reinstall in the reverse manner. The handle of the inside door can be undoing the door trim panel and taking off the retaining bolt or bolts and the actuator Cable of the handle. To reinforce the door latch or outside door handle, you may have to disconnect the outside door handle lever, the door trim panel, the power window regulator and the anti theft guard bolts and the guard. Disengage the outside door handle reinforcement retaining bolt and latch mounting screws, withdraw the latch , outside door handle reinforcement along with it as a single unit, disconnect any linking electrical pins and actuation wires. On 2006 to 2009 models, then, when you are setting the lock cylinder, it should click to engage after you have first voided the door latch and outside door handle reinforcement and then pressed the release button. For 2010 to 2012 models, do not think that merely replacing the door lock cylinder will work as it means building a new unit with a lock repair package from the dealers. Last but not the least; for the 2013 and later models, take out the outside door handle, then open the door handle cover and then unlock the door lock before reassembling in the contrary manner.