Make sure this part fits

Mercury XL2Z-9424-CA Manifold Assembly - Inlet

1999-2001 Mercury Mountaineer XL2Z9424CA

Customer Questions & Expert Answers (9)
Ford XL2Z-9424-CA Manifold Assembly - Inlet
  • Part Description
    Manifold Assy - Inlet
  • Base No.
    9424
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Mercury
    Base No.9424
    Manufacturer Part NumberXL2Z-9424-CA, XL2Z9424CA
    Part DescriptionManifold Assy - Inlet
    Other NamesIntake Manifold, Manifold
    Manufacturer NoteUpper. Includes 9E926 Throttle Body. Includes mounting screws W705464-S309., SOHC
    Item Dimensions19.9 x 7.1 x 12.8 inches
    Item Weight9.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKUXL2Z-9424-CA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1999-2001 Mercury Mountaineer6 Cyl 4.0L4AT 4R70W, 5AT 5R55E
  • Customer Questions & Expert Answers

    Q:
    Is the the correct part for the attached VIN? Posted by FordPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if XL2Z-9424-CA fits your vehicle.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done with the wiring harness and ground strap for the 2005 Ford Explorer Sport Trac? Posted by Customer
    A:
    Remove the nut retaining the wiring harness to the intake manifold, and remove the ground strap at the rear of the manifold.
    Posted by FordPartsGiant Specialist
    Q:
    How should the manifold be positioned during installation for the 1996 Ford Explorer? Posted by Customer
    A:
    Install the manifold to the cylinder heads, making sure the bolt holes are aligned. Install the bolts and tighten them finger-tight, ensuring not to move the manifold back and forth to avoid displacing the O-ring seals.
    Posted by FordPartsGiant Specialist
    Q:
    How do you install the upper intake manifold for the 1999 Ford Explorer? Posted by Customer
    A:
    Clean and inspect the mounting faces, place a new gasket onto the lower intake mounting face, and secure the upper intake manifold and throttle body assembly onto the lower intake manifold.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be done before installing the new intake manifold for the 2004 Ford Explorer Sport Trac? Posted by Customer
    A:
    Clean away all traces of old gasket material and remove oil and dirt with a cloth and solvent, such as lacquer thinner.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after tightening the nuts and bolts for the 2004 Ford Explorer Sport Trac? Posted by Customer
    A:
    The remainder of installation is the reverse of removal.
    Posted by FordPartsGiant Specialist
    Q:
    What should be done after applying the sealant for the 1999 Ford Explorer? Posted by Customer
    A:
    Install the intake manifold gasket, then reapply sealant to the four corners.
    Posted by FordPartsGiant Specialist
    Q:
    How do you remove the throttle body for the 2003 Ford Explorer Sport Trac? Posted by Customer
    A:
    Remove the mounting bolts and discard the throttle body gasket. Clean the gasket mating surfaces and use a new gasket when reinstalling. Tighten the throttle body mounting bolts securely.
    Posted by FordPartsGiant Specialist
    See expert answers on similar Intake Manifold
    Q:
    What should be checked before setting the manifold in place for the 1998 Ford Explorer? Posted by Customer
    A:
    Make sure all intake port openings, coolant passage holes, and bolt holes are aligned correctly.
    Posted by FordPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Ford Part XL2Z-9424-CA, the Right Choice

To ensure reliability, purchase Ford part # XL2Z-9424-CA Manifold Assembly - Inlet. It is sometimes referred to as Mercury Intake Manifold. In terms of quality and longevity, OEM parts are top-tier. This is because they are made according to Ford's demanding factory specifications and go through strict quality control. This part fits specific Mercury Mountaineer models.

FordPartsGiant.com is a leading supplier of genuine Ford parts and accessories such as Ford XL2Z9424CA Manifold Assembly - Inlet. On our platform, we provide genuine Ford parts at incredible prices while ensuring top-tier quality. Feel at ease shopping with us, knowing our parts have a hassle-free return policy and rapid delivery service. For detailed Mercury parts information, click here.

Why choose Ford Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly