Mercury 6L2Z-11002-AA Starter Motor Assembly

You can Select Your Vehicle to check if 6L2Z-11002-AA fits your vehicle.

Before assuming the starter is the problem, the following items should be checked in the starting circuit:1. Ensure that the battery cable clamps are clean and tightly connected to the battery.2. Inspect the condition of the battery cables and replace any damaged ones.3. Test the battery to determine if it needs to be replaced.4. Check the tightness of the starter mounting bolts.5. Verify the adjustment of the Digital Transmission Range sensor or Clutch Pedal Position switch and ensure that the shift lever is in the correct position.6. Check the operation of the starter relay, which is located in the engine compartment fuse and relay box on later models.

Replace them with new ones, if equipped.

Remove the starter.

To ensure the relevant systems provide battery voltage to the ignition switch, you should check the adjustment of the Digital Transmission Range sensor or Clutch Pedal Position switch and make sure they operate correctly.