Mercury 7T4Z-8620-A V-Belt

You can Select Your Vehicle to check if 7T4Z-8620-A fits your vehicle.

Replacement may not be necessary until after 100,000 miles.

Yes, on some models, you may need to remove and reinstall the accessory drivebelt tensioner during the replacement process.

To inspect the accessory drivebelt, follow these steps: Raise the front of the vehicle and secure it on jackstands. Remove the right-hand wheel and splash shield in the right fender well. Inspect the entire belt length for cracks, separation, fraying, or glazing. Assess the pulleys for damage. Replacement may not be necessary until the belt has traveled over 100,000 miles. Small cracks in ribbed belts may be acceptable unless they are extensive or deep.