×
- Live Chat
- 1-888-788-9341
My Garage
My Account
Cart
Genuine Ford Bronco Car Batteries
Auto Battery- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Car Batteries found
Ford Bronco Car Batteries
The Car Batteries in Ford Bronco vehicles is also an essential electrochemical gadget because it supplies electrical current for starting the car engine and also some of the instrumentation such as; ignition and fuel injection. It also operates parts if the engine is turned off and the control functions such as the clock and the memory of various elements of the vehicle are kept running even if the vehicle is not in use. In the past, Ford Bronco models have incorporated different types of batteries; these are; Conventional Flooded Lead-Acid (FLA) batteries, FLA Maintenance-Free batteries, and Absorbed Glass Mat (AGM) batteries. Although FLA batteries may need routine maintenance, factors like the following set AGM batteries above them: No need for regular maintenance, electrolyte leakage is rare, and the efficiency is higher off-road. Some of the parameters of Car Batteries such as size and Cold Cranking Amps (CCA) are very important in that they determine whether the battery will function properly especially in cold climates.
We provide a wide range of Ford Bronco Car Batteries at the best prices possible. If you need Ford Bronco Car Batteries, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.
Ford Bronco Car Batteries Parts Questions & Experts Answers
- Q: How do you disconnect the battery on Ford Bronco?A: To disconnect the battery, start by disconnecting both cables from the battery terminals. It is important to use a battery terminal puller if necessary and always disconnect the negative cable first and hook it up last to avoid shorting the battery. Next, loosen the two battery hold-down clamp nuts to disengage the hold-down legs from the battery tray and remove the hold-down clamp as an assembly. Lift out the battery, using special straps or clamps if available to make the process easier. To install the battery, simply reverse the removal steps. Ensure that the Battery Cables and battery posts are free of corrosion and clean or replace them if necessary.
- Q: What is the importance of battery maintenance on Ford Bronco?A: To begin work on the vehicle, turn off the engine and all accessories and remove the cable from the negative terminal. Sealed batteries do not require a check of the electrolyte or adding water. In batteries that need maintenance, ensure there is enough distilled water in each cell by inspecting its level of electrolyte. Investigate damage to battery condition, cable clamp, and positive terminal. Apply petroleum jelly or grease on top and tighten hold-down clamp bolt to prevent corrosion. Apply primer and paint to damaged metal parts then clean off corrosion with baking soda solution and water. If you keep the battery in a vehicle for charging purposes, remove cables. A good rating of a slow charger does not exceed 3 amperes. Over the twelve to sixteen-hour process of charging, lead covers should be removed from vent caps, connect charger leads onto battery posts while watching out for overheating.
