How to check and replace Cooling Fan and fan clutch on Ford Bronco?

To inspect fan clutch in vehicles, cold start the engine and turn the fan manually to ensure it rotates smoothly. Construct a flat box with an open center through which the fan clutch can fit, start the engine, and listen for that first "roar" when the running fan kicks in. The sound should die away within five minutes. Place the flat box in front of the radiator, start the engine, and keep it above 2,500 rpm while checking on fan engagement as well as engine temperature. If it reaches the highest safe temperature without engaging the clutch, replace it. Start the engine after removing the board and raise its speed above 2,500 rpm to study the slowing down of funs. Replace the fan clutch if it does not disengage even after five minutes. For the removal of bolt-on fan clutches and their installation, take off the radiator shroud, unscrew the clutch from the water pump, and pull out the whole assembly. Reinstallation is a reverse procedure.

Genuine Ford Bronco Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cooling Fan Assemblys found

View related parts
Ford Bronco MOTOR AND FAN ASY - ENGINE COO
Part Number: MB3Z-8C607-J
$449.74 MSRP: $723.64
You Save: $273.90 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: MB3Z-8C607-B, RF-452
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Bronco MOTOR AND FAN ASY - ENGINE COO
Part Number: MB3Z-8C607-F
$461.04 MSRP: $741.82
You Save: $280.78 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: RF-451, MB3Z-8C607-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Bronco | 4 Cyl 2.3 L GAS, 6 Cyl 2.7 L GAS
View related parts
Ford Bronco MOTOR AND FAN ASY - ENGINE COO
Part Number: MB3Z-8C607-C
$458.78 MSRP: $738.18
You Save: $279.40 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2023 Ford Bronco | 6 Cyl 3.0 L GAS
View related parts
Ford Bronco Fan Assembly
Part Number: E7TZ-8600-B
Product Specifications
- Other Name: Fan Assy; Blade, Fan Blade
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1996 Ford Bronco | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford Bronco Fan Assembly
Part Number: F4TZ-8600-A
Product Specifications
- Other Name: Fan Assy; Fan Blade
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford Bronco | 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 4AT A4LD, 4AT E4OD, 5MT

Ford Bronco Cooling Fan Assembly Parts Questions & Experts Answers

Fan Assembly
E7TZ-8600-B
Q: How to check and replace Cooling Fan and fan clutch on Ford Bronco?
A: To inspect fan clutch in vehicles, cold start the engine and turn the fan manually to ensure it rotates smoothly. Construct a flat box with an open center through which the fan clutch can fit, start the engine, and listen for that first "roar" when the running fan kicks in. The sound should die away within five minutes. Place the flat box in front of the Radiator, start the engine, and keep it above 2,500 rpm while checking on fan engagement as well as engine temperature. If it reaches the highest safe temperature without engaging the clutch, replace it. Start the engine after removing the board and raise its speed above 2,500 rpm to study the slowing down of funs. Replace the fan clutch if it does not disengage even after five minutes. For the removal of bolt-on fan clutches and their installation, take off the radiator shroud, unscrew the clutch from the Water Pump, and pull out the whole assembly. Reinstallation is a reverse procedure.