How to overhaul brake calipers on Ford Crown Victoria?

Before replacing brake calipers, weigh your options first. Exchange offers new or remanufactured calipers. Always rebuild calipers two at a time. To uninstall, set parking brake, chock wheels, loosen lug nuts, raise vehicle and remove the wheel. Remove the bolt of the brake hose and unfasten the hose from the caliper. The outside of the caliper should be cleaned off then remove the piston. Inspect and clean parts. Then put back together the caliper with new components, grease it with fresh oil, and push the piston into it. When required reconnect the hose, bleed brakes if necessary, place the wheel back on, lower the car body, tighten lug nuts, and test brake operation.

Genuine Ford Crown Victoria Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

65 Brake Calipers found

View related parts
Ford Crown Victoria CALIPER ASY - BRAKE
Part Number: F5AZ2B120A
$84.61 MSRP: $114.17
You Save: $29.56 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E
View related parts
Ford Crown Victoria Brake Caliper Assembly
Part Number: F3VY-2B121-A
$32.16 MSRP: $43.94
You Save: $11.78 (27%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD-E
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: YW1Z-2552-BA
$57.54 MSRP: $78.62
You Save: $21.08 (27%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads; Caliper
- Manufacturer Note: RH & LH Housing less pads
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2001 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: F5AZ-2B121-A
$38.99 MSRP: $53.28
You Save: $14.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E
View related parts
Ford Crown Victoria Brake Caliper
Part Number: F2AZ-2B120-A
$48.79 MSRP: $66.67
You Save: $17.88 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Caliper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1993 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: F5AZ-2V552-BARM
$37.51 MSRP: $59.82
You Save: $22.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Manufacturer Note: RH - MOTORCRAFT PREFERRED VALUE
- Position: Passenger Side
- Replaces: F5AZ-2552-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1995 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Housing
Part Number: F5AZ-2552-BA
$37.51 MSRP: $59.82
You Save: $22.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Police
- Replaced by: F5AZ-2V552-BARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD-E
View related parts
Ford Crown Victoria Housing
Part Number: F5AZ2552A
$54.85 MSRP: $76.20
You Save: $21.35 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD-E
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W1Z-2V120-DARM
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Passenger Side
- Replaced by: GU2Z-2V120-NRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W1Z-2V121-DARM
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Driver Side
- Replaced by: GU2Z-2V121-NRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Caliper With Pads
Part Number: 1W1Z-2B120-AA
Product Specifications
- Other Name: Caliper
- Manufacturer Note: RH - with pads
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 1W1Z-2V120-BARM
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Manufacturer Note: RH - Motorcraft Reman - less pads
- Position: Passenger Side
- Replaced by: F8VZ-2V120-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 1W1Z-2V121-BARM
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Manufacturer Note: LH - Motorcraft Reman - less pads
- Position: Driver Side
- Replaced by: F8VZ-2V121-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 2W1Z-2552-BA
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Manufacturer Note: RH & LH less pads
- Position: Passenger Side And Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W1Z-2B120-AB
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Passenger Side
- Replaced by: 7W7Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W1Z-2B121-AB
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Driver Side
- Replaced by: 7W7Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Caliper With Pads
Part Number: 3W1Z-2V130-ABRM
Product Specifications
- Position: Passenger Side
- Replaced by: GU2Z-2V120-NRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Caliper With Pads
Part Number: 3W1Z-2V131-ABRM
Product Specifications
- Position: Driver Side
- Replaced by: GU2Z-2V121-NRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W7Z-2B120-AA
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Passenger Side
- Replaced by: 7W7Z-2B120-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Brake Caliper Assembly-Less Pads
Part Number: 3W7Z-2B121-AA
Product Specifications
- Other Name: Caliper Assy - Brake - Less Pads
- Position: Driver Side
- Replaced by: 7W7Z-2B121-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W

| Page 1 of 4 |Next >

1-20 of 65 Results

Ford Crown Victoria Brake Caliper Parts Questions & Experts Answers

Brake Caliper Assembly-Less Pads
7W1Z-2553-A
Q: How to overhaul brake calipers on Ford Crown Victoria?
A: Before replacing brake calipers, weigh your options first. Exchange offers new or remanufactured calipers. Always rebuild calipers two at a time. To uninstall, set parking brake, chock wheels, loosen lug nuts, raise vehicle and remove the wheel. Remove the bolt of the brake hose and unfasten the hose from the caliper. The outside of the caliper should be cleaned off then remove the piston. Inspect and clean parts. Then put back together the caliper with new components, grease it with fresh oil, and push the piston into it. When required reconnect the hose, bleed brakes if necessary, place the wheel back on, lower the car body, tighten lug nuts, and test brake operation.