How to replace brake pads on Ford Crown Victoria?

Some 1995 and later models have modifications in their front brake caliper and brake pads. To replace the brake pads, remove the brake fluid reservoir cover and siphon out half of the brake fluid. Loosen lug nuts, raise and secure the vehicle, and remove the wheels. Inspect the brake disc and remove if machining is needed. Remove the caliper mounting bolts and depress the caliper piston. Remove the caliper and brake pad assembly, then replace the inner and outer brake pads. Apply thread locking compound and grease to the caliper bolts. Hang the caliper from the upper control arm on some models. Tighten the caliper bolts, depress the brake pedal, check the brake fluid level, and top it off if needed.

Genuine Ford Crown Victoria Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Brake Pads found

View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: 4U2Z-2V200-CA
$36.59 MSRP: $66.65
You Save: $30.06 (46%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Rear Pad
- Replaces: 4W1Z-2200-AA, 6W1Z-2200-AA, BRF-1040
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pad
Part Number: 4U2Z-2V001-BA
$36.59 MSRP: $66.65
You Save: $30.06 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Shoe And Lining Assembly
Part Number: F8AZ-2001-CA
$50.31 MSRP: $91.65
You Save: $41.34 (46%)
ADD TO CART
Product Specifications
- Other Name: Shoe And Lining Assy
- Manufacturer Note: Base & police
- Replaced by: 2U2Z-2V001-ZA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Kit - Brake Shoe
Part Number: F5AZ-2001-A
$41.16 MSRP: $74.98
You Save: $33.82 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 2U2Z-2V001-KA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD-E
View related parts
Ford Crown Victoria Kit - Brake Lining
Part Number: 3U2Z-2V001-BB
$54.89 MSRP: $99.98
You Save: $45.09 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Pad, Front Pad
- Replaces: 3W7Z-2001-BA, 3U2Z-2V001-BA, BRSD-931, 3W1Z-2001-BA, BRF-931
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, 4AT, 4AT 4R70W, 4AT 4R75W, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe
Part Number: 3W7Z-2001-BA
$54.89 MSRP: $99.98
You Save: $45.09 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 3U2Z-2V001-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe
Part Number: 6W1Z-2001-A
$45.59 MSRP: $66.65
You Save: $21.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Pad - Brake
Part Number: 4U2Z-2V200-AB
$68.39 MSRP: $99.98
You Save: $31.59 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: 6W1Z-2200-AA
$36.59 MSRP: $66.65
You Save: $30.06 (46%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V200-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe
Part Number: F8VZ-2001-AA
$50.31 MSRP: $91.65
You Save: $41.34 (46%)
ADD TO CART
Product Specifications
- Replaced by: 2U2Z-2V001-ZA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Kit - Brake Lining
Part Number: G2MZ-2V001-Z
$36.59 MSRP: $66.65
You Save: $30.06 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe
Part Number: 3W1Z-2001-AA
$45.59 MSRP: $66.65
You Save: $21.06 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 4U2Z-2V001-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Crown Victoria | 8 Cyl 4.6L | 4AT, 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Pad - Brake
Part Number: 3U2Z-2V001-BA
$54.89 MSRP: $99.98
You Save: $45.09 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad
- Position: Front
- Replaced by: 3U2Z-2V001-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R70W, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Lining
Part Number: 7W7Z-2001-B
Product Specifications
- Manufacturer Note: BASE VERSION
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Pad - Brake
Part Number: G2MZ-2V200-A
Product Specifications
- Replaced by: BU2Z-2V200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | 8 Cyl 4.6L Romeo SOHC EFI | 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: 1W1Z-2200-BA
Product Specifications
- Replaced by: 2W1Z-2200-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2001 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: 2W1Z-2200-AA
Product Specifications
- Other Name: Brake Pad, Rear Pad
- Replaces: 1W1Z-2200-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: 3W7Z-2200-BA
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-2000 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: F5AZ-2200-A
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD, 4AT AOD-E
View related parts
Ford Crown Victoria Kit - Brake Shoe And Lining
Part Number: F5AZ-2200-B
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Crown Victoria | 8 Cyl 4.6L | 4AT AOD-E

| Page 1 of 2 |Next >

1-20 of 24 Results

Ford Crown Victoria Brake Pads

Brake Pads in Ford Crown Victoria are part of the braking system used to apply friction to the brake rotors to be able to slow or stop the vehicle. Such pads are usually made from a friction material that is moulded and firmly attached to a metal plate by means of bonding or interlocking fasteners. it is a wearing material that gets worn out after sometime and is normally replaced, many automobiles are fitted with wearing sensors which notify the driver when the pads are worn to the barest minimum. Several brake pads may have been used in the various Crown Victoria models and this include the non metallic, the semi-metallic and the ceramic brake pads which all come with different performances. The procedure of fitting brake pads involves the replacement of the connected hardware component like clips and springs to guarantee the optimal performance and durability of the brake pad. Routine servicing is beneficial for the integrity of brakes and global braking efficiency, especially if it is done at least once with an interval of 50,000 miles on the car's odometer.

We provide a wide range of Ford Crown Victoria Brake Pads at the best prices possible. If you need Ford Crown Victoria Brake Pads, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Brake Pads Parts Questions & Experts Answers

Kit - Brake Shoe And Lining
4U2Z-2V200-CA
Q: How to replace brake pads on Ford Crown Victoria?
A: Some 1995 and later models have modifications in their front Brake Caliper and brake pads. To replace the brake pads, remove the brake fluid reservoir cover and siphon out half of the brake fluid. Loosen lug nuts, raise and secure the vehicle, and remove the wheels. Inspect the Brake Disc and remove if machining is needed. Remove the caliper mounting bolts and depress the caliper piston. Remove the caliper and brake pad assembly, then replace the inner and outer brake pads. Apply thread locking compound and grease to the caliper bolts. Hang the caliper from the upper control arm on some models. Tighten the caliper bolts, depress the brake pedal, check the brake fluid level, and top it off if needed.