How do I remove the under dash panel and locate the brake light switch assembly on Ford Crown Victoria?

Remove under dash panel. Locate brake light switch near top of brake pedal and disconnect from pedal by removing retaining clip. Disconnect switch and booster pushrod from pedal arm, keeping spacers. Unlock electrical connector with screwdriver and unplug from switch. Disengage clip inside connector. Install switch to connector by snapping clip into place. Reconnect assembly to brake pedal. Install under dash panel. Check brake lights for proper operation.

Genuine Ford Crown Victoria Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: F87Z-13480-AA
$28.04 MSRP: $44.73
You Save: $16.69 (38%)
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2011 Ford Crown Victoria | 8 Cyl 4.6L, 8 Cyl 4.6L Romeo SOHC EFI | 4AT, 4AT 4R75W, 4-Speed Automatic Transmission 4R75E Livonia, Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: E9TZ-13480-A
$19.04 MSRP: $30.36
You Save: $11.32 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT 4R75W
View related parts
Ford Crown Victoria Switch Assembly - Stop Light
Part Number: FOAZ-13480-A
Product Specifications
- Other Name: Switch Assy - Stop Light; Stoplamp Switch
- Manufacturer Note: Calif Emission Standards
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford Crown Victoria | 8 Cyl 4.6L | 4AT 4R70W, 4AT AOD, 4AT AOD-E

Ford Crown Victoria Brake Light Switch

The Ford Crown Victoria Brake Light Switch is responsible for illuminating the brake lights whenever the driver depresses the brake pedal to make other drivers on the road aware of his or her slowing-down or halting intentions. This mechanism is very essential in as much as it will be ensuring road safety since those at the rear will be aware that the vehicle is in motion. There may be some differences in the type or design of brake light switch depending on the model or year of the Crown Victoria but, the basic purpose of the brake light switch will always be the same.

We provide a wide range of Ford Crown Victoria Brake Light Switch at the best prices possible. If you need Ford Crown Victoria Brake Light Switch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Crown Victoria Brake Light Switch Parts Questions & Experts Answers

Switch Assembly - Stop Light
FOAZ-13480-A
Q: How do I remove the under dash panel and locate the brake light switch assembly on Ford Crown Victoria?
A: Remove under dash panel. Locate brake light switch near top of brake pedal and disconnect from pedal by removing retaining clip. Disconnect switch and booster pushrod from pedal arm, keeping spacers. Unlock electrical connector with screwdriver and unplug from switch. Disengage clip inside connector. Install switch to connector by snapping clip into place. Reconnect assembly to brake pedal. Install under dash panel. Check brake lights for proper operation.