How to install a clutch master cylinder on Ford Escape?

Disconnect the clutch master cylinder pushrod from the pedal and unscrew the bracket nut. Clamp pliers onto the clutch fluid feed hose and disconnect the reservoir hose. Using a wrench, disconnect the hydraulic line fitting at the cylinder. Cap the line ends to prevent leakage. Remove the mounting nut and detach the cylinder. Place the master cylinder on the firewall and install the mounting nut. Connect the hydraulic line fitting to the cylinder and tighten it. Attach the fluid feed hose and tighten the clamp. Remove the pliers. Connect the pushrod to the pedal. Fill the reservoir with brake fluid and bleed the clutch system. For 2005 and later models, disconnect the clutch hose from the brake master cylinder, plug the hose and port, remove the mounting nuts, detach the pushrod, disconnect the fluid line, and remove the cylinder. Plug the openings. Installation is the reverse of removal. Fill the reservoir and bleed the system.

Genuine Ford Escape Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Clutch Master Cylinders found

View related parts
Ford Escape Master Cylinder Assembly
Part Number: 3L8Z-7A543-C
$66.84 MSRP: $92.83
You Save: $25.99 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Escape | 4 Cyl 2.0L Zetec EFI, 6 Cyl 3.0L DOHC EFI Modular | 5-Speed Manual Transmission, Four-Wheel Drive (Full Time) (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)
View related parts
Ford Escape Master Cylinder Assembly
Part Number: 5L8Z-7A543-AB
$30.77 MSRP: $43.83
You Save: $13.06 (30%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2012 Ford Escape | 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L DOHC EFI Modular, 6 Cyl 3.0L OHC Duratec | 5-Speed Manual Transmission - AK, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive, Two-Wheel Drive (Left Hand Drive)

Ford Escape Clutch Master Cylinder

The Clutch Master Cylinder in ford escape vehicles is a component that applies hydraulic pressure to engage the clutch when the clutch pedal is pressed. This cylinder is used significantly to translate force applied by the driver on the pedal into hydraulic pressure to enable the clutch to come off from the flywheel. When a Clutch Master Cylinder is faulty, the pedals will feel spongy when pressed, the clutch, will be leaking fluids, gear shifting will be challenging, and the engagement will be noisy. Potential loss of more air can occur from the cylinder, through the seals if they have degraded thus affecting the pedal feel. This means that the Clutch Master Cylinder should be well preserved so that transmission operates efficiently in vehicles of Ford Escape.

We provide a wide range of Ford Escape Clutch Master Cylinder at the best prices possible. If you need Ford Escape Clutch Master Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Escape Clutch Master Cylinder Parts Questions & Experts Answers

Master Cylinder Assembly
3L8Z-7A543-C
Q: How to install a clutch master cylinder on Ford Escape?
A: Disconnect the clutch master cylinder pushrod from the pedal and unscrew the bracket nut. Clamp pliers onto the clutch fluid feed hose and disconnect the reservoir hose. Using a wrench, disconnect the hydraulic line fitting at the cylinder. Cap the line ends to prevent leakage. Remove the mounting nut and detach the cylinder. Place the master cylinder on the firewall and install the mounting nut. Connect the hydraulic line fitting to the cylinder and tighten it. Attach the fluid feed hose and tighten the clamp. Remove the pliers. Connect the pushrod to the pedal. Fill the reservoir with brake fluid and bleed the clutch system. For 2005 and later models, disconnect the clutch hose from the brake master cylinder, plug the hose and port, remove the mounting nuts, detach the pushrod, disconnect the fluid line, and remove the cylinder. Plug the openings. Installation is the reverse of removal. Fill the reservoir and bleed the system.