How do you remove and install the ignition lock cylinder on Ford Expedition?

To remove the ignition lock cylinder it is required that the negative cable be disconnected from the battery followed by disconnecting the positive cable and waiting for 2 minutes. Second, switch the key to the Run position. Use a 1/8 inch punch to push down on the hole located at the bottom of the steering column cover that is surrounding the lock cylinder at the same time pulling on the lock refer to it as cylinder to be able to remove it from the housing of the steering column. For installation, push in the retaining pin located on the side of the lock cylinder and turn the ignition key to the 'Run' position. Place the lock cylinder back into the steering column housing so as to fit into the hole provided and slide in until it locates the interlocking washer appropriately. Twist the key anticlockwise to unlock the retaining pin so that it goes back to it slot at the steering column housing. Last of all, rotate the lock to ensure that the operation is correct in all positions and finally fix the lock in place by reversing all the operations that were followed to remove the lock.

Genuine Ford Expedition Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ignition Lock Cylinders found

View related parts
Ford Expedition Cylinder Ignition
Part Number: AU5Z-11582-B
$70.02 MSRP: $130.73
You Save: $60.71 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: SW-6845, SW-6606, SW-6149, 5F9Z-11582-BA, 4L3Z-11582-BB, 7U5Z-11582-B, SW-6390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2017 Ford Expedition | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
- 2005-2010 Ford Expedition | 8 Cyl 5.4L | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cylinder Ignition
Part Number: AU5Z-11582-A
$97.45 MSRP: $133.16
You Save: $35.71 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Lock Cylinder With Keys
Part Number: FL3Z-11582-B
$46.06 MSRP: $73.45
You Save: $27.39 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaces: FL3Z-11582-A, SW-7611
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | 6 Cyl 3.5 L GAS, 6 Cyl 3.5L GTDI | 10-Speed Automatic Transmission (10R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Lockset - Complete Vehicle
Part Number: 4L3Z-11582-BB
$79.09 MSRP: $130.73
You Save: $51.64 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: AU5Z-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2010 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cylinder - Private Lock
Part Number: 2L2Z-11582-B
$55.00 MSRP: $90.91
You Save: $35.91 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Lock Service Pack - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition CYLINDER ASY - IGNITION SWITCH
Part Number: NL1Z-11582-A
$88.92 MSRP: $130.00
You Save: $41.08 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder & Key, Ignition Lock Cylinder
- Replaces: NL1Z-11582-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Lockset - Complete Vehicle
Part Number: 4L3Z-11582-BC
Product Specifications
- Manufacturer Note: Lock Service Pack - Ignition
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2005 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Expedition Ignition Lock Cylinder

The Ignition Lock Cylinder in the Ford Expedition automobiles primarily works to unlock the possibility of starting the engine with the help of key turnings. This part forms part of the ignition switch through which the battery electricity gets distributed to where it is desired once the proper key is inserted. From the Ford Expedition, it is evident that various models have shifted from the normal key- operated ignition system to keyless ignition systems improving on the ease of use. While other makes employ mechanical lock cylinders which over the years sometimes develop faults and get jammed, the newer model of the Expeditions uses keyless fobs that connect with the car's system, enabling one to start it by merely pressing a button. However, there are problems associated with the Ignition Lock Cylinder, for example, it may be difficult to rotate the key or start the engine, in most cases, that is due to wear or electrical malfunction. Evidently, the changes that occurred in the Ford Expedition's Ignition Lock Cylinder over the years have been progressing toward higher reliability and easier usage.

We provide a wide range of Ford Expedition Ignition Lock Cylinder at the best prices possible. If you need Ford Expedition Ignition Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Expedition Ignition Lock Cylinder Parts Questions & Experts Answers

Lockset - Complete Vehicle
4L3Z-11582-BB
Q: How do you remove and install the ignition lock cylinder on Ford Expedition?
A: To remove the ignition lock cylinder it is required that the negative cable be disconnected from the battery followed by disconnecting the positive cable and waiting for 2 minutes. Second, switch the key to the Run position. Use a 1/8 inch punch to push down on the hole located at the bottom of the steering column cover that is surrounding the lock cylinder at the same time pulling on the lock refer to it as cylinder to be able to remove it from the housing of the steering column. For installation, push in the retaining pin located on the side of the lock cylinder and turn the ignition key to the 'Run' position. Place the lock cylinder back into the steering column housing so as to fit into the hole provided and slide in until it locates the interlocking washer appropriately. Twist the key anticlockwise to unlock the retaining pin so that it goes back to it slot at the steering column housing. Last of all, rotate the lock to ensure that the operation is correct in all positions and finally fix the lock in place by reversing all the operations that were followed to remove the lock.