How to replace parking brake cables on Ford Expedition?

To replace the parking brake cables, first, ensure the vehicle's air suspension system is turned off if equipped. Release the parking brake, and if you're working on a rear cable, loosen the rear wheel lug nuts for that side. Raise the vehicle and support it securely with jackstands, then remove the wheel. For the front cable, relieve tension by having an assistant pull down on the cable under the dash while inserting a drill bit into the parking brake pedal assembly's hole; do not remove the pin until the new cable is installed. Under the vehicle, disconnect the rear end of the front cable from the parking brake cable equalizer. On sport utility vehicles, locate the equalizer underneath, disengage the left rear cable from it by squeezing the tangs of the cable ferrule, and trace the left rear cable to the front cable connection in front of the equalizer, removing both cables. Then, detach the front cable from its bracket. Remove various interior components, including the front door scuff plate, cowl side trim panel, and lower instrument panel steering column cover. Remove the retaining screw from the parking brake release handle assembly and route the release handle through the dash opening. Unplug the electrical connector for the parking brake switch at the top of the parking brake pedal assembly, remove the three retaining nuts, and take out the parking brake pedal assembly. Disengage the plug on the front parking brake cable from the parking brake pedal and slide the cable through the pedal bracket. Pry the rubber seal from the front floorpan, and under the vehicle, squeeze the cable ferrule at the bracket forward of the equalizer to remove the front parking brake cable. Installation is the reverse of the removal process. For rear cables on trucks, relieve tension and disengage the equalizer from the rear cables. On sport utility vehicles, disengage the left rear cable from the equalizer and from the front cable/rear cable connector, then disengage the right rear cable from the equalizer. Squeeze the tangs on the parking brake cable ferrule and remove the cable through its bracket. Unclip the rear cable from the frame and, on models with rear drum brakes, remove the brake drum and brake shoe assembly to disconnect the parking brake cable from the parking brake lever. Squeeze the cable ferrule's fingers on the backing plate and slide the cable through it. On models with rear disc brakes, squeeze the tangs on the cable ferrule at the caliper anchor plate bracket and disengage the cable from the parking brake lever. Reinstallation follows the reverse of the removal process.

Genuine Ford Expedition Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Parking Brake Cables found

View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: AL1Z-2A635-A
$52.33 MSRP: $83.45
You Save: $31.12 (38%)
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Passenger Side
- Replaces: 8L1Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2017 Ford Expedition | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 6L1Z-2A635-AA
$52.28 MSRP: $71.43
You Save: $19.15 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Passenger Side
- Replaces: 2L1Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 2L1Z-2A635-AA
$52.28 MSRP: $71.43
You Save: $19.15 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Cable asy. rear - RH
- Position: Passenger Side
- Replaced by: 6L1Z-2A635-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 8L1Z-2853-A
$35.48 MSRP: $49.29
You Save: $13.81 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Cable
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2017 Ford Expedition | 6 Cyl 3.5L GTDI, 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 6L1Z-2853-BB
$37.88 MSRP: $75.27
You Save: $37.39 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Cable
- Replaces: 2L1Z-2853-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 7L1Z-2A635-C
$40.60 MSRP: $63.64
You Save: $23.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Cable
- Position: Driver Side
- Replaces: 2L1Z-2A635-AB, 5L1Z-2A635-B, 6L1Z-2A635-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2017 Ford Expedition | 6 Cyl 3.5L GTDI, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 4AT 4R75W, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 2L1Z-2A635-AB
$40.60 MSRP: $63.64
You Save: $23.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Cable asy. rear - LH
- Position: Driver Side
- Replaced by: 7L1Z-2A635-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assy - Parking Brake
Part Number: 2L1Z-2853-BA
$37.88 MSRP: $75.27
You Save: $37.39 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Cable asy. front - running board-power deployable
- Replaced by: 6L1Z-2853-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2005 Ford Expedition | 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 5.4L, 8 Cyl 5.4L Modular SOHC | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assembly - Parking
Part Number: 8L1Z-2A635-A
$52.33 MSRP: $83.45
You Save: $31.12 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Position: Passenger Side
- Replaced by: AL1Z-2A635-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2009 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assembly - Parking
Part Number: 5L1Z-2A635-B
$40.60 MSRP: $63.64
You Save: $23.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Position: Driver Side
- Replaced by: 7L1Z-2A635-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assembly - Parking
Part Number: 6L1Z-2A635-AB
$40.60 MSRP: $63.64
You Save: $23.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Position: Driver Side
- Replaced by: 7L1Z-2A635-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assembly - Parking
Part Number: 7L1Z-2A635-B
$0.00
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford Expedition Cable Assembly - Parking
Part Number: 5L1Z-2A635-A
Product Specifications
- Other Name: Cable Assy - Parking Brake
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005 Ford Expedition | 8 Cyl 5.4L | 4AT 4R75W, 4-Speed Automatic Transmission 4R70W (AODE), 4-Speed Automatic Transmission 4R75E Livonia, 4-Speed Automatic Transmission AODEW/4R75E W/TSS, 6-Speed Automatic Transmission (6R75), 6-Speed Automatic Transmission (6R80), Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)

Ford Expedition Parking Brake Cable

Parking brake cable in Ford Expedition is and important bracket that is used in the park brake system of the vehicle which helps to stop the car from rolling when parked and especially if the parking area is inclined. This cable connects the parking brake, referred to also as the emergency brake or handbrake to the braking mechanism to guarantee that the parking brake works efficiently. There could be sundry types of Parking Brake Cable used in the different website ford expedition over the years due to change in operational requirement. A faulty parking brake cable can cause problems such as; inadequate tension when pulled, causing the parking brake not to lock the car firmly in place or inability to pull the parking brake at all if the cable has snapped. The repair and maintenance of the Parking Brake Cable is an important aspect of the Ford Expedition's healthy functionality and security.

We provide a wide range of Ford Expedition Parking Brake Cable at the best prices possible. If you need Ford Expedition Parking Brake Cable, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Expedition Parking Brake Cable Parts Questions & Experts Answers

Cable Assembly - Parking
6L1Z-2A635-AB
Q: How to replace parking brake cables on Ford Expedition?
A: To replace the parking brake cables, first, ensure the vehicle's air suspension system is turned off if equipped. Release the parking brake, and if you're working on a rear cable, loosen the rear wheel lug nuts for that side. Raise the vehicle and support it securely with jackstands, then remove the wheel. For the front cable, relieve tension by having an assistant pull down on the cable under the dash while inserting a drill bit into the parking brake pedal assembly's hole; do not remove the pin until the new cable is installed. Under the vehicle, disconnect the rear end of the front cable from the parking brake cable equalizer. On sport utility vehicles, locate the equalizer underneath, disengage the left rear cable from it by squeezing the tangs of the cable ferrule, and trace the left rear cable to the front cable connection in front of the equalizer, removing both cables. Then, detach the front cable from its bracket. Remove various interior components, including the front door scuff plate, cowl side trim panel, and lower instrument panel steering column cover. Remove the retaining screw from the parking brake release handle assembly and route the release handle through the dash opening. Unplug the electrical connector for the parking brake switch at the top of the parking brake pedal assembly, remove the three retaining nuts, and take out the parking brake pedal assembly. Disengage the plug on the front parking brake cable from the parking brake pedal and slide the cable through the pedal bracket. Pry the rubber seal from the front floorpan, and under the vehicle, squeeze the cable ferrule at the bracket forward of the equalizer to remove the front parking brake cable. Installation is the reverse of the removal process. For rear cables on trucks, relieve tension and disengage the equalizer from the rear cables. On sport utility vehicles, disengage the left rear cable from the equalizer and from the front cable/rear cable connector, then disengage the right rear cable from the equalizer. Squeeze the tangs on the parking brake cable ferrule and remove the cable through its bracket. Unclip the rear cable from the frame and, on models with rear drum brakes, remove the brake drum and Brake Shoe assembly to disconnect the parking brake cable from the parking brake lever. Squeeze the cable ferrule's fingers on the backing plate and slide the cable through it. On models with rear disc brakes, squeeze the tangs on the cable ferrule at the caliper anchor plate bracket and disengage the cable from the parking brake lever. Reinstallation follows the reverse of the removal process.

Related Ford Expedition Parts

Browse by Year

2017 Parking Brake Cable 2016 Parking Brake Cable 2015 Parking Brake Cable 2014 Parking Brake Cable 2013 Parking Brake Cable 2012 Parking Brake Cable 2011 Parking Brake Cable 2010 Parking Brake Cable 2009 Parking Brake Cable 2008 Parking Brake Cable 2007 Parking Brake Cable 2006 Parking Brake Cable 2005 Parking Brake Cable 2004 Parking Brake Cable 2003 Parking Brake Cable