How to install and bleed a clutch master cylinder on Ford F-150?

Disconnect the clutch master cylinder pushrod from the clutch pedal. Remove the clutch pedal position switch. Detach the clutch master cylinder reservoir from the firewall. Disconnect the clutch fluid hydraulic line from the transmission and plug it. Rotate the master cylinder to detach it from the firewall. Bleed the clutch master cylinder by filling the reservoir and allowing fluid flow. Install both the master cylinder and fluid reservoir. Connect the clutch pedal position switch and push together again. Reconnect hydraulic line to transmission, fill up reservoir and bleed Clutch system.

Genuine Ford F-150 Clutch Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Clutch Master Cylinders found

View related parts
Ford F-150 Master Cylinder Assembly
Part Number: F2TZ-7A543-D
$37.15 MSRP: $67.67
You Save: $30.52 (46%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992 Ford F-150 | 8 Cyl 5.0L, 8 Cyl 5.8L | 4MT, 5MT
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: XL3Z-7A543-AA
$41.61 MSRP: $60.83
You Save: $19.22 (32%)
ADD TO CART
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2001 Ford F-150 | 6 Cyl 4.2L, 8 Cyl 4.6L, 8 Cyl 5.4L | 5MT
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: E8TZ-7A543-C
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Ford F-150 | 6 Cyl 3.8L, 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L | 3AT C6, 3MT, 4AT AOD, 4MT, 5MT
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: F65Z-7A543-AD
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford F-150 | 6 Cyl 4.2L, 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 5.4L | 5MT
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: F3TZ-7A543-A
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-1996 Ford F-150 | 8 Cyl 5.0L, 8 Cyl 5.8L | 4MT, 5MT
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: 6L3Z-7A543-AA
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Replaces: 5L3Z-7A543-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2008 Ford F-150 | 6 Cyl 4.2L OHV EFI, 8 Cyl 4.6L Romeo SOHC EFI, 8 Cyl 4.6L Windsor SOHC EFI, 8 Cyl 5.4L | 5-Speed Manual Transmission - Mazda M5R2-C, Four-Wheel Drive (Part Time) (Left Hand Drive), Left Hand Drive, Rear-Wheel Drive (Left Hand Drive)
View related parts
Ford F-150 Master Cylinder Assembly
Part Number: E3TZ-7A543-A
Product Specifications
- Other Name: Master Cylinder Assy; Master Cylinder
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1987 Ford F-150 | 6 Cyl 3.8L, 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L | 3AT C5, 3AT C6, 3MT, 4AT AOD, 4MT

Ford F-150 Clutch Master Cylinder Parts Questions & Experts Answers

Master Cylinder Assembly
6L3Z-7A543-AA
Q: How to install and bleed a clutch master cylinder on Ford F-150?
A: Disconnect the clutch master cylinder pushrod from the clutch pedal. Remove the clutch pedal position switch. Detach the clutch master cylinder reservoir from the firewall. Disconnect the clutch fluid hydraulic line from the transmission and plug it. Rotate the master cylinder to detach it from the firewall. Bleed the clutch master cylinder by filling the reservoir and allowing fluid flow. Install both the master cylinder and fluid reservoir. Connect the clutch pedal position switch and push together again. Reconnect hydraulic line to transmission, fill up reservoir and bleed Clutch system.