How do you regularly change your oil and filter as part of a home mechanic's preventive maintenance on Ford F-250?

For preventive maintenance, regular oil changes are essential. Aging engine oil will become diluted and contaminated, leading to premature engine wear. This is because replacing the oil filter with each change has low costs and easy installation. Find the oil drain plug and filter without hitting hot exhaust parts. Return to running condition after starting it, let the engine warm up, and park it on flat ground which turns it off again. Make sure the car is safely raised; then put a glove on while removing the plug and place the pan below it. Ensure all of the oil has been drained out completely while checking for metal particles as well. Once dry, reinstall the plug as well as move the pan beneath the filter. At this point, apply some lubricant to the gasket of the new filter after tightening it with your hand, and then lower the car down. Add five quarts of fresh oil into it, check the level through the dipstick before finally starting the engine for a short time.

Genuine Ford F-250 Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Filters found

View related parts
Ford F-250 Filter Assembly - Oil
Part Number: F1AZ-6731-BD
$13.73
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Replaces: F1AZ-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.8L | 3AT C6, 4AT 4R100, 4AT 4R70W, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Filter Assembly - Oil
Part Number: D9AZ-6731-A
$8.78 MSRP: $16.82
You Save: $8.04 (48%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Oil Filter
- Replaces: E7TZ-6731-A, FL-1-HP
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1980-1996 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Filter Assembly - Oil
Part Number: F4TZ-6731-A
$28.39 MSRP: $51.09
You Save: $22.70 (45%)
ADD TO CART
Product Specifications
- Other Name: Kit - Element & Gasket - Oil Filter; Oil Filter
- Manufacturer Note: DI Turbo
- Replaced by: F4TZ-6731-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1996 Ford F-250 | 8 Cyl 7.3L | 3AT C6, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Filter Assembly
Part Number: E3TZ-6731-A
$13.73 MSRP: $40.73
You Save: $27.00 (67%)
ADD TO CART
Product Specifications
- Other Name: Filter Assy; Oil Filter
- Replaced by: E3TZ-6731-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991-1994 Ford F-250 | 8 Cyl 7.3L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
- 1983-1989 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Kit - Element & Gasket - Oil Filter
Part Number: E7TZ-6731-A
$8.78 MSRP: $16.82
You Save: $8.04 (48%)
ADD TO CART
Product Specifications
- Replaced by: D9AZ-6731-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1987-1996 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Filter Assembly - Oil
Part Number: F1AZ-6731-A
$7.40 MSRP: $11.80
You Save: $4.40 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: FILTER ASY - OIL
- Manufacturer Note: 24V
- Replaced by: F1AZ-6731-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994-1997 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.4L, 8 Cyl 5.8L | 3AT C6, 4AT 4R70W, 4AT E4OD, 4MT, 5MT

Ford F-250 Oil Filter

As for the specific product, the Oil Filter of Ford F-250 vehicles means a lot to keep the engine health conditions of the vehicles since it prevents any small contaminants and maintains clean oil flow. Using cellulose or synthetic media, these are efficiency and capacity classed filters and are mostly the replaceable element cartridge filters or spin-on filters. Spin-on filters come with heavy metal canisters, and are equipped with anti-drain back valves, and Bypass valves to ensure oil circulation in the engine. Performance filters increase strength, flow rate, and filtration performance; prevent pressure breakouts and metal-to-metal contact. Taking into consideration the durability and its effect on contaminants, Ford F-250 oil filters are meant to maximize performance of the vehicle.

We provide a wide range of Ford F-250 Oil Filter at the best prices possible. If you need Ford F-250 Oil Filter, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Oil Filter Parts Questions & Experts Answers

Filter Assembly - Oil
F4TZ-6731-A
Q: How do you regularly change your oil and filter as part of a home mechanic's preventive maintenance on Ford F-250?
A: For preventive maintenance, regular oil changes are essential. Aging engine oil will become diluted and contaminated, leading to premature engine wear. This is because replacing the oil filter with each change has low costs and easy installation. Find the oil drain plug and filter without hitting hot exhaust parts. Return to running condition after starting it, let the engine warm up, and park it on flat ground which turns it off again. Make sure the car is safely raised; then put a glove on while removing the plug and place the pan below it. Ensure all of the oil has been drained out completely while checking for metal particles as well. Once dry, reinstall the plug as well as move the pan beneath the filter. At this point, apply some lubricant to the gasket of the new filter after tightening it with your hand, and then lower the car down. Add five quarts of fresh oil into it, check the level through the dipstick before finally starting the engine for a short time.