How to change the transmission fluid and replace the filter on Ford F-250?

At specified intervals, change transmission fluid and replace filter. No drain plug, remove transmission oil pan to drain fluid. Warm up vehicle, support on jackstands. Place drain pan under pan, remove bolts, lower pan to drain fluid. Inspect for metal particles. Remove filter/strainer, clean surfaces, replace with new gasket. Apply RTV sealant, position new gasket, reinstall pan, tighten bolts diagonally. Lower vehicle, add fluid gradually through dipstick tube, check level with dipstick, run engine through gears. Drive to reach normal temperature, park on level surface, check fluid level again, adjust as needed. Avoid overfilling.

Genuine Ford F-250 Automatic Transmission Filter

AT Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Automatic Transmission Filters found

View related parts
Ford F-250 Filter Assembly
Part Number: F6AZ-7A098-A
$33.86 MSRP: $54.00
You Save: $20.14 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter Assy; Filter, Screen
- Replaces: F4TZ-7A098-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford F-250 | 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L | 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Filter Assembly
Part Number: F6TZ-7A098-BB
$28.27 MSRP: $45.09
You Save: $16.82 (38%)
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Replaced by: YC3Z-7A098-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Filter Assembly
Part Number: F6TZ-7A098-AB
$27.82 MSRP: $44.36
You Save: $16.54 (38%)
ADD TO CART
Product Specifications
- Other Name: Filter Assy
- Replaced by: YC3Z-7A098-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1996-1999 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.6L, 8 Cyl 5.0L, 8 Cyl 5.4L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT 4R100, 4AT 4R70W, 4AT E4OD, 5MT
View related parts
Ford F-250 Screen Assembly
Part Number: D5AZ-7A098-B
$16.76 MSRP: $26.73
You Save: $9.97 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screen Assy; Filter, Filter Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Screen Assembly
Part Number: D3TZ-7A098-B
Product Specifications
- Other Name: Screen Assy; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Screen Assembly
Part Number: E1AZ-7A098-A
Product Specifications
- Other Name: Screen Assy; Filter, Filter Kit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT
View related parts
Ford F-250 Screen Assembly
Part Number: E5TZ7A098C
Product Specifications
- Other Name: Screen Assy; Filter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1993 Ford F-250 | 6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 7.3L, 8 Cyl 7.5L | 3AT C6, 4AT AOD, 4AT E4OD, 4MT, 5MT

Ford F-250 Automatic Transmission Filter

The Automatic Transmission Filter is responsible for cleaning the transmission system such that maintaining the health of a Ford F-250's transmission system. This filter prevents contaminants from moving round in the transmission and in the process block the flow of transmission and cause some damages to the entire transmission system thus affecting the performance of the entire transmission. The Automatic Transmission Filters used in the Ford F-250 assembly has undergone different versions over the years. The most popular type is built into the transmission case, and mounted beneath a 'transmission pan', which is easily removable when it is time for transmission maintenance. It is also important to note that some F-250 models may have filters installed which are much harder to get to and in turn, may require quite a large degree of disassembly to be replaced. Also, there are Ford in-line transmission filters that may be fitted between the transmission and the fluid cooler to improve filtration. It is possible to use external spin-on or cartridge-type filters which provide easy access to the filters and more frequent replacement for the optimal efficiency of a transmitters functioning and long service life.

We provide a wide range of Ford F-250 Automatic Transmission Filter at the best prices possible. If you need Ford F-250 Automatic Transmission Filter, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford F-250 Automatic Transmission Filter Parts Questions & Experts Answers

Filter Assembly
F6TZ-7A098-AB
Q: How to change the transmission fluid and replace the filter on Ford F-250?
A: At specified intervals, change transmission fluid and replace filter. No drain plug, remove transmission oil pan to drain fluid. Warm up vehicle, support on jackstands. Place drain pan under pan, remove bolts, lower pan to drain fluid. Inspect for metal particles. Remove filter/strainer, clean surfaces, replace with new gasket. Apply RTV sealant, position new gasket, reinstall pan, tighten bolts diagonally. Lower vehicle, add fluid gradually through dipstick tube, check level with dipstick, run engine through gears. Drive to reach normal temperature, park on level surface, check fluid level again, adjust as needed. Avoid overfilling.