Other Name: Camshaft Position Sensor, Camshaft Sensor
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2020 Ford Fusion | 4 Cyl 1.5 L GAS, 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
Q: How to remove and install a CMP sensor on a Ford Fusion?
A: Disconnect the cable from the negative battery terminal. For four cylinder models, the CMP sensor is at the top corners of the valve cover. Remove the engine cover and disconnect the CMP sensor connector. Remove the sensor and check the O-ring condition. For V6 models, the CMPs are on the valve covers or cylinder heads. Detach the wiring harness clip or remove the interference capacitor or air intake duct as needed. Disconnect the CMP sensor connector, remove the sensor and check the O-ring. Lubricate the O-ring with clean engine oil before installation.