Other Name: Sensor - Crankshaft Position - Cps; Crankshaft Position Sensor, Crankshaft Sensor
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2013-2020 Ford Fusion | 4 Cyl 1.5 L GAS, 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
A: To replace the CKP sensor, first disconnect the negative battery terminal. Raise the front of the vehicle and remove the right front wheel. Remove the necessary access panels or undercovers. Disconnect the electrical connector from the CKP sensor, remove the mounting bolt, and lift the sensor. For 2.0L, 2.3L, and 2.5L engines, set the No. 1 cylinder at TDC before removing the sensor. For installation, slide the sensor under the crankshaft pulley and install the mounting bolt. For 3.0L models, remove the sensor O-ring. Installation is the reverse of removal.