How to replace the Door Handle,Door Latch and Door Lock Cylinder on Ford Fusion?

To replace the outside door handle lever on 2012 and earlier models firstly, remove the trim cap to the outside handle retaining screw; on the 2006 to 2009 models, take out the screw but for the 2010 model, this screw must only be loosened. After that, remove the cover of the outside handle and pull the handle down and backward to free it from the handle reinforcement provided on the inside of the door. Check the outside door handle gaskets and, if they are cracked or perished, fit new ones and reverse the process. For the models produced after 2013, there will be a cap over the door handle screw; pull this trim cap to release the door handle screw; hold the door handle as if opening the door; rotate the release screw eight full turns before pulling up the rear part of the door handle assembly. If equipped with push button starting, remove the electrical connection from the door handle assembly and reinstall in the reverse manner. The handle of the inside door can be undoing the door trim panel and taking off the retaining bolt or bolts and the actuator Cable of the handle. To reinforce the door latch or outside door handle, you may have to disconnect the outside door handle lever, the door trim panel, the power window regulator and the anti theft guard bolts and the guard. Disengage the outside door handle reinforcement retaining bolt and latch mounting screws, withdraw the latch , outside door handle reinforcement along with it as a single unit, disconnect any linking electrical pins and actuation wires. On 2006 to 2009 models, then, when you are setting the lock cylinder, it should click to engage after you have first voided the door latch and outside door handle reinforcement and then pressed the release button. For 2010 to 2012 models, do not think that merely replacing the door lock cylinder will work as it means building a new unit with a lock repair package from the dealers. Last but not the least; for the 2013 and later models, take out the outside door handle, then open the door handle cover and then unlock the door lock before reassembling in the contrary manner.

Genuine Ford Fusion Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Door Lock Cylinders found

View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: 8E5Z-5421991-B
$63.98 MSRP: $93.53
You Save: $29.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Position: Driver Side
- Replaces: 5L8Z-7821991-AA, 6E5Z-5421991-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | 4 Cyl 2.3L, 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: 6E5Z-5443262-B
$75.08 MSRP: $109.77
You Save: $34.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder
- Replaces: 6E5Z-5443262-A, 6E5Z-5443262-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2012 Ford Fusion | 4 Cyl 2.3L, 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: DP5Z-5421991-C
$67.78 MSRP: $123.47
You Save: $55.69 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock; Lock Cylinder, Lock Cylinder Assy
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Fusion | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: DS7Z-5421991-C
$88.12 MSRP: $128.83
You Save: $40.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder, Lock Cylinder Assy
- Position: Driver Side Only
- Replaces: DS7Z-5421991-G, DS7Z-5421991-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2020 Ford Fusion | 4 Cyl 1.5 L GAS, 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0L Duratec Hybrid (130kW), 4 Cyl 2.0L EcoBoost (200PS), 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS), 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lockset - Complete Vehicle
Part Number: ES7Z-5422050-B
$62.18 MSRP: $90.90
You Save: $28.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lockset - Complete Vehicle
Part Number: HS7Z-5422050-A
$82.27 MSRP: $120.28
You Save: $38.01 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (200PS), 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) , 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: DS7Z-5421991-D
$88.12 MSRP: $128.83
You Save: $40.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Position: Driver Side Only
- Replaced by: DS7Z-5421991-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013 Ford Fusion | 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: 6E5Z-5421991-B
$63.98 MSRP: $93.53
You Save: $29.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Position: Driver Side
- Replaced by: 8E5Z-5421991-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: 6E5Z-5443262-A
$75.08 MSRP: $109.77
You Save: $34.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Replaced by: 6E5Z-5443262-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: 6E5Z-5443262-BA
$75.08 MSRP: $109.77
You Save: $34.69 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Replaced by: 6E5Z-5443262-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Cylinder Assembly - Lock
Part Number: DS7Z-5421991-G
$88.12 MSRP: $128.83
You Save: $40.71 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assy - Lock
- Position: Driver Side Only
- Replaced by: DS7Z-5421991-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Fusion Door Lock Cylinder

Ford Fusion model of automobiles is equipped with an interior part called the Door Lock Cylinder, which is installed in the front Side Doors and is designed to lock and unlock doors by means of the automotive key. This mechanism is critical for locking and Unlocking the vehicle and at the same time allowing one to access the interior cabin of the vehicle. However, similar to various modern cars, most of the new Ford Fusion comes with no door lock cylinder inbuilt, but these cars still contain this traditional locking system. Eventually, the Door Lock Cylinder also undergoes constant wearing and thus challenges in operating the door lock arise. Some of the signs that one is likely to show if the cylinder is failing include, a key that cannot be turned or jams. In order to have the Ford Fusion functioning properly and securely the Door Lock Cylinder should be changed as soon as it starts to fail.

We provide a wide range of Ford Fusion Door Lock Cylinder at the best prices possible. If you need Ford Fusion Door Lock Cylinder, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Fusion Door Lock Cylinder Parts Questions & Experts Answers

Cylinder Assembly - Lock
6E5Z-5443262-B
Q: How to replace the Door Handle,Door Latch and Door Lock Cylinder on Ford Fusion?
A: To replace the outside door handle lever on 2012 and earlier models firstly, remove the trim cap to the outside handle retaining screw; on the 2006 to 2009 models, take out the screw but for the 2010 model, this screw must only be loosened. After that, remove the cover of the outside handle and pull the handle down and backward to free it from the handle reinforcement provided on the inside of the door. Check the outside door handle gaskets and, if they are cracked or perished, fit new ones and reverse the process. For the models produced after 2013, there will be a cap over the door handle screw; pull this trim cap to release the door handle screw; hold the door handle as if opening the door; rotate the release screw eight full turns before pulling up the rear part of the door handle assembly. If equipped with push button starting, remove the electrical connection from the door handle assembly and reinstall in the reverse manner. The handle of the inside door can be undoing the door trim panel and taking off the retaining bolt or bolts and the actuator Cable of the handle. To reinforce the door latch or outside door handle, you may have to disconnect the outside door handle lever, the door trim panel, the power Window Regulator and the anti theft guard bolts and the guard. Disengage the outside door handle reinforcement retaining bolt and latch mounting screws, withdraw the latch , outside door handle reinforcement along with it as a single unit, disconnect any linking electrical pins and actuation wires. On 2006 to 2009 models, then, when you are setting the lock cylinder, it should click to engage after you have first voided the door latch and outside door handle reinforcement and then pressed the release button. For 2010 to 2012 models, do not think that merely replacing the door lock cylinder will work as it means building a new unit with a lock repair package from the dealers. Last but not the least; for the 2013 and later models, take out the outside door handle, then open the door handle cover and then unlock the door lock before reassembling in the contrary manner.

Related Ford Fusion Parts

Browse by Year

2020 Door Lock Cylinder 2019 Door Lock Cylinder 2018 Door Lock Cylinder 2017 Door Lock Cylinder 2016 Door Lock Cylinder 2015 Door Lock Cylinder 2014 Door Lock Cylinder 2013 Door Lock Cylinder 2012 Door Lock Cylinder 2011 Door Lock Cylinder 2010 Door Lock Cylinder 2009 Door Lock Cylinder 2008 Door Lock Cylinder 2007 Door Lock Cylinder 2006 Door Lock Cylinder