How to install a Trunk Latch and key lock cylinder on Ford Fusion?

To install a key lock cylinder, a special rivet installation tool is necessary for new rivet installation. Begin by removing the trunk lid trim panel, which is secured with pin-type fasteners. Next, disconnect the trunk lid actuator cable from the trunk lid key lock cylinder, followed by disconnecting the electrical connector from the lock cylinder. Drill out the two rivets securing the lock cylinder and remove it. The installation process is the reverse of removal. For the latch, again remove the trunk lid trim panel and disconnect the actuator cable from the trunk lid lock cylinder. Then, disconnect the electrical connector from the trunk lid latch, remove the latch mounting nuts, and take out the latch. The installation follows the reverse order of removal.

Genuine Ford Fusion Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Trunk Latches found

View related parts
Ford Fusion Lock Assembly
Part Number: 7E5Z-5443200-B
$72.30 MSRP: $105.70
You Save: $33.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Lock
- Replaces: 7E5Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2009 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lock Assembly
Part Number: DS7Z-5443200-A
$44.25 MSRP: $80.60
You Save: $36.35 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy
- Replaced by: FR3Z-5443200-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2014 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lock Assembly
Part Number: 7E5Z-5443200-A
$72.30 MSRP: $105.70
You Save: $33.40 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy
- Replaced by: 7E5Z-5443200-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lock Assembly
Part Number: AE5Z-5443200-A
$72.66 MSRP: $110.08
You Save: $37.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Lock
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Fusion | 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lock Assembly
Part Number: 6E5Z-5443200-D
$53.22 MSRP: $96.93
You Save: $43.71 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy; Lock
- Replaces: 6E5Z-5443200-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford Fusion | 4 Cyl 2.3L, 6 Cyl 3.0L DOHC EFI, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Lock Assembly
Part Number: DS7Z-5443200-B
Product Specifications
- Other Name: Lock Assy; Lock Actuator
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2014-2016 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Fusion Trunk Latch

The Trunk Latch of Ford Fusion cars is designed to snap the trunk lid into place and hold it shut while the car is in motion and to seal the contents of the trunk from vandalism and the environment. This is like a seat belt which has to be pulled to release the lock to permit its functionality. The Ford Fusion Trunk Latch is a sturdy automotive part that is mostly made of stainless steel, it is built to be wind-resistant to avoid any latches from popping open and causing one's cargo to go flying off. It is shown that depending on the year of manufacture of Ford Fusion, several types of Trunk Latch may have been incorporated, though the specific types are not described. Regardless, the primary goal remains consistent: in order to afford the neighbouring part of the trunk enough protection and stability. These include worn out of improperly functioning Trunk Latch parts that threaten the Ford Fusion Trunk Latch safety and functionality which in turn necessitates regular maintenance of the Ford Fusion Trunk Latch.

We provide a wide range of Ford Fusion Trunk Latch at the best prices possible. If you need Ford Fusion Trunk Latch, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Fusion Trunk Latch Parts Questions & Experts Answers

Lock Assembly
6E5Z-5443200-D
Q: How to install a Trunk Latch and key lock cylinder on Ford Fusion?
A: To install a key lock cylinder, a special rivet installation tool is necessary for new rivet installation. Begin by removing the trunk lid trim panel, which is secured with pin-type fasteners. Next, disconnect the trunk lid actuator cable from the trunk lid key lock cylinder, followed by disconnecting the electrical connector from the lock cylinder. Drill out the two rivets securing the lock cylinder and remove it. The installation process is the reverse of removal. For the latch, again remove the trunk lid trim panel and disconnect the actuator cable from the trunk lid lock cylinder. Then, disconnect the electrical connector from the trunk lid latch, remove the latch mounting nuts, and take out the latch. The installation follows the reverse order of removal.