How to disconnect and remove the Fuel Pump Driver Module on Ford Fusion?

This procedure applies to vehicles produced after 2011 with some exclusion for cars equipped with the 3,5L V6 engine. First of all, you need to pull the plug off the negative cable connected to the battery terminal. Third, take off the trim panel of the car at the left side of the luggage compartment. Then, you have to remove the Fuel Pump Driver Module (FPDM) electrical connector after which you have to unscrew the fasteners and the module. Installation is done in the process of reversing the removal steps that has been mentioned above.

Genuine Ford Fusion Fuel Pump Driver Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Fuel Pump Driver Modules found

View related parts
Ford Fusion Control Unit
Part Number: CU5Z-9D370-F
$57.80 MSRP: $112.67
You Save: $54.87 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Module, Fuel Pump Controller
- Manufacturer Note: Used For Fuel Pump Relays
- Replaces: CU5Z-9D370-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Fusion | 4 Cyl 1.5L GTDI, 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW), 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Module - Engine Fuel
Part Number: AA8Z-9D370-D
$64.87 MSRP: $126.44
You Save: $61.57 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: GA8Z-9D370-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2012 Ford Fusion | 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Module - Engine Fuel
Part Number: AA8Z-9D370-A
$64.87 MSRP: $126.44
You Save: $61.57 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: GA8Z-9D370-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Fusion | 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Control Unit
Part Number: FU5Z-9D370-C
$67.94 MSRP: $132.44
You Save: $64.50 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Used For Fuel Pump Relays
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2020 Ford Fusion | 4 Cyl 1.5 L GAS, 4 Cyl 1.5L GTDI, 4 Cyl 2.0 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV), 4 Cyl 2.0L Duratec Hybrid (130kW), 4 Cyl 2.0L EcoBoost (200PS), 4 Cyl 2.0L EcoBoost (240PS), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS), 6 Cyl 2.7L | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Relay
Part Number: AA8Z-9345-A
$64.87 MSRP: $126.44
You Save: $61.57 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Replaced by: GA8Z-9D370-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2011 Ford Fusion | 4 Cyl 2.5L Duratec HE PFI, 4 Cyl 2.5L PFI Gas/Electric, 6 Cyl 3.0L OHC Duratec, 6 Cyl 3.5L DOHC VCT SMPI | 5-Speed Automatic Transmission Mazda FNR5, 5-Speed Manual Transmission (G5M), 6-Speed Automatic Transaxle - AWF21, 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Manual Transmission Mazda G6M, CVT Auto Trans Powersplit Elec, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive
View related parts
Ford Fusion Control Unit
Part Number: CU5Z-9D370-E
$57.80 MSRP: $112.67
You Save: $54.87 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: Used For Fuel Pump Relays
- Replaced by: CU5Z-9D370-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013 Ford Fusion | 4 Cyl 1.6L PI TC ETHNL, 4 Cyl 2.0L Duratec Hybrid (130kW) , 4 Cyl 2.0L EcoBoost (240PS) , 4 Cyl 2.5L Duratec (110kW/150PS), 4 Cyl 2.5L Duratec FFV (125kW/170PS) | 6-Speed Automatic Transmission 6F Mid-Range, 6-Speed Automatic Transmission 6F55, 6-Speed Manual Transmission - B6, ECVT Auto Trans Power Split, Four-Wheel Drive (Full Time) (Left Hand Drive), Front-Wheel Drive (Left Hand Drive), Left Hand Drive

Ford Fusion Fuel Pump Driver Module

A component found on Ford Fusion cars is know as the Fuel Pump Driver Module, whose role is to control electrical power to the pump. This part is also known as the fuel pump drive, fuel solenoid driver or FSD/FPDM and its purpose is to good manage the fuel pump with the help of electricity taken from car system. In the Ford Fusion over the years different models of the Fuel Pump Driver Module have been used that are optimized for performance and durability. While specific differences between these types are not detailed, the primary function remains consistent: in order to be able to gain effective control over the fuel pump. The Fuel Pump Driver Module found in Ford Fusion cars performs the following functions in enhancing the car's fuel delivery system.

We provide a wide range of Ford Fusion Fuel Pump Driver Module at the best prices possible. If you need Ford Fusion Fuel Pump Driver Module, you can shop with confidence on our website. All our OEM parts come with a manufacturer's warranty and are delivered to your door step with a fast delivery service.

Ford Fusion Fuel Pump Driver Module Parts Questions & Experts Answers

Module - Engine Fuel
AA8Z-9D370-A
Q: How to disconnect and remove the Fuel Pump Driver Module on Ford Fusion?
A: This procedure applies to vehicles produced after 2011 with some exclusion for cars equipped with the 3,5L V6 engine. First of all, you need to pull the plug off the negative cable connected to the battery terminal. Third, take off the trim panel of the car at the left side of the luggage compartment. Then, you have to remove the Fuel Pump Driver Module (FPDM) electrical connector after which you have to unscrew the fasteners and the module. Installation is done in the process of reversing the removal steps that has been mentioned above.